User's Manual

Antenna Controller User Manual Ver. 1.00
FCC Compliance
P/N 1100031 page 2-2
1.1.1 Terminals
ANT-1
→
→→
→
ANT-4
Antenna coils connection
TB1
RS422/485 serial communication connection.
TB2
RS232C serial communication connection
TB3
Open collector Digital outputs.
TB4
Digital inputs.
TB5
12Vac input power supply connection.
1.1.2 Molex Connectors
P1
Optional TTL Serial communication.
P3
8 Digital Inputs.
P4
8 Digital outputs (10 pin Molex connector).
1.1.3 Fuses
F1
MCI PCB main fuse (500mA).
F2, F3, F4
Automatic self resetting Poli-switch fuses
1.1.4 LED’s
Power Supply indicators (red)
VIN
12Vdc Supply to system.
+VL
12Vdc supply to Outputs.
+5VD
5Vdc supply to digital section.
+5V TX
5Vdc supply to transmitters.
+7.5V
7.5Vdc supply to receiver.
Transmit indicators (green)
TR1
Transmitter 1
TR2
Transmitter 2
TR3
Transmitter 3
TR4
Transmitter 4
REC
Receive indicator led (yellow)
L1
→
→→
→
L8
Eight Digital output indicator LED’s (red)
IN1
→
→→
→
IN8
Eight Digital input indicator LED’s (red)
1.1.5 Jumpers
SL1, SL2, SL3, SL4
Transmitter mode selectors
(for transmitters 1 to 4 respectively )
J1, J2, J16, J19
50
Ω
load connection at transmitter output
J6
Receiver Disable, by-pass
J7
RS232/RS422(485) serial communication mode selector
J10
→
→→
→
J13
Channel enable.
TX DATA
Data transmission enable.
1.1.6 Tuning Capacitors
C39
Transmitter #1
C25
Transmitter #2
C21
Transmitter #3
C23
Transmitter #4