Data Sheet

ManualsBrandsON SEMICONDUCTOR ManualsDiodesSchottky rectifier DO 214AB 40 V

SS32 - S310 — Schottky Rectifier

Publication Order Number:

SS39/D

October-2017,

Rev. 2

SS32 - S310

Schottky Rectifier

Features

• Metal to Silicon Rectifiers, Majority Carrier Conduction

• Low-Forward Voltage Drop

• Easy Pick and Place

• High-Surge Current Capability

Ordering Information

Absolute Maximum Ratings

Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be opera-

ble above the recommended operating conditions and stressing the parts to these levels is not recommended. In addi-

tion, extended exposure to stresses above the recommended operating conditions may affect device reliability. The

absolute maximum ratings are stress ratings only. Values are at T

= 25°C unless otherwise noted.

Part Number Marking Package Packing Method

SS32 SS32

DO-214AB Tape and Reel

SS33 SS33

SS34 SS34

SS35 SS35

SS36 SS36

SS38 SS38

SS39 SS39

S310 S310

Symbol Parameter

Value

Units

SS32 SS33 SS34 SS35 SS36 SS38 SS39 S310

RRM

Maximum Repetitive Reverse

Voltage

20 30 40 50 60 80 90 100 V

F(AV)

Maximum Average Forward Current

at T

= 75C

3.0 A

FSM

Non-Repetitive Peak Forward Surge

Current: 8.3 ms Single Half-Sine

Wave

100 A

dV/dt Maximum Voltage Rate of Change 10000 V/S

STG

Storage Temperature Range -55 to +150 C

Operating Junction Temperature -55 to +150 C

Description

The SS32-S310 series includes a high-efficiency, low

power loss, general-propose Schottky rectifiers. The clip-

bonded leg structure provides high thermal performance

and low electrical resistance. These rectifiers are suited

for free wheeling, secondary rectification, and reverse

polarity protection applications.

SMC/DO-214AB

COLOR BAND DENOTES CATHODE

Summary of content (4 pages)

PAGE 1
Description The SS32-S310 series includes a high-efficiency, low power loss, general-propose Schottky rectifiers. The clipbonded leg structure provides high thermal performance and low electrical resistance. These rectifiers are suited for free wheeling, secondary rectification, and reverse polarity protection applications.
PAGE 2
Symbol PD Parameter Power Dissipation RJA Thermal Resistance, Junction to Ambient RJL Thermal Resistance, Junction to Lead (1) Value Units 2.27 W 55 C/W 17 C/W Note: 1. Device mounted on FE-4 PCB 0.55 x 0.55 inch (14 x 14 mm). Electrical Characteristics Values are at TA = 25°C unless otherwise noted. Symbol Parameter Test Value Conditions SS32 SS33 SS34 SS35 SS36 SS38 SS39 S310 VF Forwarded Voltage IR Reverse Current TA = 25C at Rated VR TA = 100C IF = 3.
PAGE 3
SS32 - S310 — Schottky Rectifier Typical Performance Characteristics Figure 1. Forward Current Derating Curve Figure 2. Non-Repetitive Surge Current Figure 3. Forward Voltage Characteristics Figure 4. Reverse Current vs. Reverse Voltage Figure 5. Total Capacitance Figure 6. Thermal Impedance Characteristics www.onsemi.
PAGE 4
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.