Datasheet

P6KE6V8(C)A - P6KE440(C)A — 600 W Transient Voltage Suppressors
© 2002 Fairchild Semiconductor Corporation www.fairchildsemi.com
P6KE6V8(C)A - P6KE440(C)A Rev. 1.2.0 1
June 2013
P6KE6V8(C)A - P6KE440(C)A
600 W Transient Voltage Suppressors
Features
• Glass-Passivated Junction
• 600 W Peak Pulse Power Capability at 1.0 ms
• Excellent Clamping Capability
• Low Incremental Surge Resistance
• Fast Response Time; Typically
< 1.0 ps from 0 V to BV for
Uni-directional and 5.0 ns for Bi-directional
• Typical I
R
< 1.0 mA Above 10 V
Applications
• Devices for Bipolar Applications
• Bi-directional Types Use CA Suffix
• Electrical Characteristics Apply in Both Directions
Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be opera-
ble above the recommended operating conditions and stressing the parts to these levels is not recommended. In addi-
tion, extended exposure to stresses above the recommended operating conditions may affect device reliability. The
absolute maximum ratings are stress ratings only. Values are at T
A
= 25°C unless otherwise noted.
Note:
1. Measured on 8.3 ms single half-sine wave; duty cycle = 4 pulses per minute maximum.
Symbol
Parameter Value Units
P
PPM
Peak Pulse Power Dissipation at t
P
= 1 ms 600 W
I
PPM
Peak Pulse Current see table A
P
D
Power Dissipation
0.375-inch Lead Length at T
A
= 75°C
5.0 W
I
FSM
Non-Repetitive Peak Forward Surge Current
Superimposed on Rated Load (JEDEC Method)
(1)
100 A
T
stg
Storage Temperature Range -65 to +175 °C
T
J
Operating Junction Temperature 175 °C
DO-15
COLOR BAND DENOTES CATHODE
ON UNIDIRECTIONAL DEVICES ONLY. NO