Datasheet

ManualsBrandsON Semiconductor ManualsDiodesRectifier Diode 8A 600V TO-220AC

July, 2006 − Rev. 7

1 Publication Order Number:

MUR820/D

MUR805, MUR810, MUR815,

MUR820, MUR840, MUR860

Preferred Devices

SWITCHMODEt

Power Rectifiers

This series are state−of−the−art devices designed for use in

switching power supplies, inverters and as free wheeling diodes.

Features

• Ultrafast 25, 50 and 75 Nanosecond Recovery Time

• 175°C Operating Junction Temperature

• Popular TO−220 Package

• Epoxy Meets UL 94 V−0 @ 0.125 in

• Low Forward Voltage

• Low Leakage Current

• High Temperature Glass Passivated Junction

• Reverse Voltage to 600 V

• Pb−Free Packages are Available*

Mechanical Characteristics:

• Case: Epoxy, Molded

• Weight: 1.9 Grams (Approximately)

• Finish: All External Surfaces Corrosion Resistant and Terminal

Leads are Readily Solderable

• Lead Temperature for Soldering Purposes: 260°C Max for 10 Seconds

*For additional information on our Pb−Free strategy and soldering details, please

download the ON Semiconductor Soldering and Mounting Techniques

Reference Manual, SOLDERRM/D.

TO−220AC

CASE 221B

PLASTIC

ULTRAFAST RECTIFIERS

8.0 AMPERES, 50−600 VOLTS

Preferred devices are recommended choices for future use

and best overall value.

http://onsemi.com

MARKING DIAGRAM

A = Assembly Location

Y = Year

WW = Work Week

U8xx = Device Code

xx = 05, 10, 15, 20, 40 or 60

G = Pb−Free Package

KA = Diode Polarity

See detailed ordering and shipping information in the package

dimensions section on page 6 of this data sheet.

ORDERING INFORMATION

AYWWG

U8xx

Summary of content (7 pages)

PAGE 1
MUR805, MUR810, MUR815, MUR820, MUR840, MUR860 Preferred Devices SWITCHMODEt Power Rectifiers This series are state−of−the−art devices designed for use in switching power supplies, inverters and as free wheeling diodes. http://onsemi.com Features • • • • • • • • • ULTRAFAST RECTIFIERS 8.0 AMPERES, 50−600 VOLTS Ultrafast 25, 50 and 75 Nanosecond Recovery Time 175°C Operating Junction Temperature Popular TO−220 Package Epoxy Meets UL 94 V−0 @ 0.
PAGE 2
MUR805, MUR810, MUR815, MUR820, MUR840, MUR860 MAXIMUM RATINGS MUR Symbol 805 810 815 820 840 860 Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR 50 100 150 200 400 600 V Average Rectified Forward Current Total Device, (Rated VR), TC = 150°C IF(AV) 8.
PAGE 3
MUR805, MUR810, MUR815, MUR820, MUR840, MUR860 MUR805, MUR810, MUR815, MUR820 1000 100 IR, REVERSE CURRENT (m A) 70 50 20 10 100°C 1.0 25°C 0.1 10 0.01 7.0 0 20 60 80 100 120 140 160 VR, REVERSE VOLTAGE (VOLTS) 40 5.0 Figure 2. Typical Reverse Current* 3.0 2.0 TJ = 175°C 100°C 25°C 1.0 0.7 0.5 0.3 0.2 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 10 9.0 RATED VR APPLIED 8.0 dc 7.0 6.0 SQUARE WAVE 5.0 4.0 3.0 2.0 1.
PAGE 4
MUR805, MUR810, MUR815, MUR820, MUR840, MUR860 MUR840 100 1000 IR, REVERSE CURRENT (m A) 70 50 20 10 100°C 25°C 1.0 0.1 10 0.01 7.0 0 50 100 150 200 250 300 350 400 VR, REVERSE VOLTAGE (VOLTS) 5.0 TJ = 175°C * The curves shown are typical for the highest voltage device in the grouping. Typical reverse current for lower voltage selections can be estimated from these same curves if VR is sufficiently below rated VR. 3.0 100°C 2.0 1.0 0.5 0.3 0.2 0.1 0.8 0.6 1.2 1.0 1.4 8.
PAGE 5
MUR805, MUR810, MUR815, MUR820, MUR840, MUR860 MUR860 1000 100 IR, REVERSE CURRENT (m A) 70 50 TJ = 150°C 20 100°C 25°C 100°C 1.0 25°C 0.1 0.01 100 7.0 200 5.0 400 300 500 VR, REVERSE VOLTAGE (VOLTS) 600 Figure 12. Typical Reverse Current* * The curves shown are typical for the highest voltage device in the grouping. Typical reverse current for lower voltage selections can be estimated from these same curves if VR is sufficiently below rated VR. 3.0 2.0 1.0 0.7 0.5 0.3 0.2 0.1 0.8 0.6 1.
PAGE 6
r(t), TRANSIENT THERMAL RESISTANCE (NORMALIZED) MUR805, MUR810, MUR815, MUR820, MUR840, MUR860 1.0 D = 0.5 0.5 0.2 0.1 0.1 0.05 0.01 ZqJC(t) = r(t) RqJC RqJC = 1.5°C/W MAX P(pk) 0.05 t2 SINGLE PULSE 0.02 0.01 0.01 D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT T1 TJ(pk) − TC = P(pk) ZqJC(t) t1 DUTY CYCLE, D = t1/t2 0.02 0.05 0.1 0.2 0.5 1.0 2.0 5.0 10 20 50 100 200 500 1000 t, TIME (ms) Figure 16.
PAGE 7
MUR805, MUR810, MUR815, MUR820, MUR840, MUR860 PACKAGE DIMENSIONS TO−220 TWO−LEAD CASE 221B−04 ISSUE D NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. C B Q F T S DIM A B C D F G H J K L Q R S T U 4 A 1 U 3 H K L R D G J INCHES MIN MAX 0.595 0.620 0.380 0.405 0.160 0.190 0.025 0.035 0.142 0.147 0.190 0.210 0.110 0.130 0.018 0.025 0.500 0.562 0.045 0.060 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 MILLIMETERS MIN MAX 15.11 15.