Data Sheet

©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com
MOC301XM, MOC302XM Rev. 1.5 4
MOC301XM, MOC302XM — 6-Pin DIP Random-Phase Triac Driver Output Optocoupler (250/400 Volt Peak)
Electrical Characteristics
T
A
= 25°C unless otherwise specified.
Individual Component Characteristics
Transfer Characteristics
Isolation Characteristics
Notes:
1. Test voltage must be applied within dv/dt rating.
2. All devices are guaranteed to trigger at an I
F
value less than or equal to max I
FT
. Therefore, recommended operating
I
F
lies between max I
FT
(30 mA for MOC3020M, 15 mA for MOC3010M and MOC3021M, 10 mA for MOC3011M and
MOC3022M, 5 mA for MOC3012M and MOC3023M) and absolute maximum I
F
(60 mA).
3. Isolation voltage, V
ISO
, is an internal device dielectric breakdown rating. For this test, pins 1 and 2 are common, and
pins 4, 5 and 6 are common.
Symbol Parameters Test Conditions Device Min. Typ. Max. Unit
EMITTER
V
F
Input Forward Voltage I
F
= 10 mA All 1.15 1.50 V
I
R
Reverse Leakage Current V
R
= 3 V, T
A
= 25°C All 0.01 100 μA
DETECTOR
I
DRM
Peak Blocking Current,
Either Direction
Rated V
DRM
, I
F
= 0
(1)
All 10 100 nA
V
TM
Peak On-State Voltage,
Either Direction
I
TM
= 100 mA peak, I
F
= 0 All 1.8 3.0 V
Symbol DC Characteristics Test Conditions Device Min. Typ. Max. Unit
I
FT
LED Trigger Current Voltage = 3 V
(2)
MOC3020M 30
mA
MOC3010M
15
MOC3021M
MOC3011M
10
MOC3022M
MOC3012M
5
MOC3023M
I
H
Holding Current, Either
Direction
All 100 μA
Symbol Parameter Test Conditions Device Min. Typ. Max. Unit
V
ISO
Isolation Voltage
(3)
t = 1 Minute All 4170 VAC
RMS