Data Sheet

ManualsBrandsON SEMICONDUCTOR ManualsBJTs & IGBTsTransistor (BJT) - Discrete SOT 23-3 1

2N3906 / MMBT3906 / PZT3906 — PNP General-Purpose Amplifier

Publication Order Number:

PZT3906/D

October-2017, Rev. 2

2N3906 / MMBT3906 / PZT3906

PNP General-Purpose Amplifier

Ordering Information

Part Number Marking Package Packing Method Pack Quantity

2N3906BU 2N3906 TO-92 3L Bulk 10000

2N3906TA 2N3906 TO-92 3L Ammo 2000

2N3906TAR 2N3906 TO-92 3L Ammo 2000

2N3906TF 2N3906 TO-92 3L Tape and Reel 2000

2N3906TFR 2N3906 TO-92 3L Tape and Reel 2000

MMBT3906 2A SOT-23 3L Tape and Reel 3000

PZT3906 3906 SOT-223 4L Tape and Reel 2500

2N3906

MMBT3906

PZT3906

EBC

TO-92 SOT-23 SOT-223

Mark:2A

Description

This device is designed for general-purpose amplifier

and switching applications at collector currents of 10 mA

to 100 mA.

Summary of content (11 pages)

PAGE 1
Description This device is designed for general-purpose amplifier and switching applications at collector currents of 10 mA to 100 mA.
PAGE 2
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Values are at TA = 25°C unless otherwise noted.
PAGE 3
Values are at TA = 25°C unless otherwise noted. Symbol Parameter Conditions Min. Max. Unit OFF CHARACTERISTICS V(BR)CEO Collector-Emitter Breakdown Voltage(4) V(BR)CBO V(BR)EBO IBL ICEX IC = -1.0 mA, IB = 0 -40 V Collector-Base Breakdown Voltage IC = -10 μA, IE = 0 -40 V Emitter-Base Breakdown Voltage IE = -10 μA, IC = 0 -5.0 V Base Cut-Off Current VCE = -30 V, VBE = 3.0 V -50 nA Collector Cut-Off Current VCE = -30 V, VBE = 3.
PAGE 4
150 100 - 40 °C 50 0.1 0.2 0.5 1 2 5 10 20 I C - COLLECTOR CURRE NT (mA) 50 100 V BESAT - BASE EM ITTE R VOLTAGE (V) β = 10 - 40 °C 0.1 125°C 0 - 40 °C 1 10 100 I C - COLLECTOR CURRENT (mA) 25 °C 1 - 40 °C 0.6 125 °C 25 °C 125 °C 0.4 0.4 V CE = 1V 0.2 0.2 1 10 100 I C - COLLECTOR CURRE NT (mA) 200 CB CAPACITANCE (pF) 1 0.1 50 75 100 TA - AMBIE NT TEMP ERATURE (° C) Figure 5. Collector Cut-Off Current vs.
PAGE 5
12 6 V CE = 5.0V f = 1.0 kHz 5 NF - NOISE FIGURE (dB) NF - NOISE FIGURE (dB) V CE = 5.0V 4 3 I C = 100 μA, R S = 200Ω 2 I C = 1.0 mA, R S = 200Ω 1 I C = 100 μA, R S = 2.0 kΩ 0 0.1 1 10 f - FREQUENCY (kHz) I C = 1.0 mA 8 6 4 I C = 100 μA 2 0 0.1 100 1 10 R S - SOURCE RESISTANCE ( kΩ ) 100 Figure 8. Noise Figure vs. Source Resistance Figure 7. Noise Figure vs.
PAGE 6
) 10 h ie - INPUT IMPEDANCE (k Ω) _ 4 h re - VOLTAGE FEEDBACK RATIO (x10 100 10 1 0.1 1 I C - COLLECTOR CURRENT (mA) 1 0.1 0.1 10 1000 V CE = 10 V f = 1.0 kHz 10 V CE = 10 V f = 1.0 kHz 500 h fe - CURRENT GAIN h oe - OUTPUT ADMITTANCE ( μmhos) 1 I C - COLLECTOR CURRENT (mA) Figure 13. Input Impedance Figure 12. Voltage Feedback Ratio 1000 VCE = 10 V f = 1.0 kHz 100 200 100 50 20 10 0.1 1 I C - COLLECTOR CURRENT (mA) 10 10 0.1 1 I C - COLLECTOR CURRENT (mA) Figure 15.
PAGE 7
2N3906 / MMBT3906 / PZT3906 — PNP General-Purpose Amplifier Physical Dimensions TO-92 (Bulk) D Figure 16. 3-LEAD, TO92, JEDEC TO-92 COMPLIANT STRAIGHT LEAD CONFIGURATION (OLD TO92AM3) Package drawings are provided as a service to customers considering ON Semiconductor components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a ON Semiconductor representative to verify or obtain the most recent revision.
PAGE 8
TO-92 (Ammo, Tape and Reel) Figure 17. 3-LEAD, TO92, MOLDED 0.200 IN LINE SPACING LEAD FORM (J61Z OPTION) Package drawings are provided as a service to customers considering ON Semiconductor components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a ON Semiconductor representative to verify or obtain the most recent revision.
PAGE 9
SOT-23 0.95 2.92±0.20 3 1.40 1.30+0.20 -0.15 1 (0.29) 2 0.95 1.90 2.20 0.60 0.37 0.20 A B 1.90 1.00 LAND PATTERN RECOMMENDATION SEE DETAIL A 1.20 MAX 0.10 0.00 (0.93) 0.10 C C 2.40±0.30 NOTES: UNLESS OTHERWISE SPECIFIED GAGE PLANE 0.23 0.08 0.25 0.20 MIN (0.55) SEATING PLANE A) REFERENCE JEDEC REGISTRATION TO-236, VARIATION AB, ISSUE H. B) ALL DIMENSIONS ARE IN MILLIMETERS. C) DIMENSIONS ARE INCLUSIVE OF BURRS, MOLD FLASH AND TIE BAR EXTRUSIONS.
PAGE 10
SOT-223 4L Figure 19. MOLDED PACKAGE, SOT-223, 4-LEAD Package drawings are provided as a service to customers considering ON Semiconductor components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a ON Semiconductor representative to verify or obtain the most recent revision.
PAGE 11
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.