Data Sheet

ManualsBrandsON SEMICONDUCTOR ManualsLogic ICsLogic IC - Flip-Flop Standard Three-state, Non-inverting SOIC 20

September 1983

Revised May 2005

MM74HC374 3-STATE Octal D-Type Flip-Flop

MM74HC374

3-STATE Octal D-Type Flip-Flop

General Description

The MM74HC374 high speed Octal D-Type Flip-Flops uti-

lize advanced silicon-gate CMOS technology. They pos-

sess the high noise immunity and low power consumption

of standard CMOS integrated circuits, as well as the ability

to drive 15 LS-TTL loads. Due to the large output drive

capability and the 3-STATE feature, these devices are ide-

ally suited for interfacing with bus lines in a bus organized

system.

These devices are positive edge triggered flip-flops. Data

at the D inputs, meeting the setup and hold time require-

ments, are transferred to the Q outputs on positive going

transitions of the CLOCK (CK) input. When a high logic

level is applied to the OUTPUT CONTROL (OC) input, all

outputs go to a high impedance state, regardless of what

signals are present at the other inputs and the state of the

storage elements.

The 74HC logic family is speed, function, and pinout com-

patible with the standard 74LS logic family. All inputs are

protected from damage due to static discharge by internal

diode clamps to V

and ground.

Features

■ Typical propagation delay: 20 ns

■ Wide operating voltage range: 2–6V

■ Low input current: 1 A maximum

■ Low quiescent current: 80 A maximum

■ Compatible with bus-oriented systems

■ Output drive capability: 15 LS-TTL loads

Ordering Code:

Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.

Connection Diagram

Pin Assignments for DIP, SOIC, SOP and TSSOP

Top View

Truth Table

H HIGH Level

LOW Level

Don't Care

Transition from LOW-to-HIGH

High Impedance State

The level of the output before steady state input conditions were

established

Order Number Package Number Package Description

MM74HC374WM M20B 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide

MM74HC374SJ M20D 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide

MM74HC374MTC MTC20 20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide

MM74HC374N N20A 20-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide

Output Clock Data Output

Control

LLXQ

HXXZ