Data Sheet

ManualsBrandsON SEMICONDUCTOR ManualsLogic ICsLogic IC - Inverter Inverter 74HC SOIC 14

MM74HC04 — Hex Inverter

Publication Order Number:

MM74HC04/D

September-2017,Rev.2

MM74HC04

Hex Inverter

Features

■

Typical propagation delay: 8ns

■

Fan out of 10 LS-TTL loads

■

Quiescent power consumption: 10µW maximum at

room temperature

■

Low input current: 1µA maximum

General Description

The MM74HC04 inverters utilize advanced silicon-gate

CMOS technology to achieve operating speeds similar to

LS-TTL gates with the low power consumption of stan-

dard CMOS integrated circuits.

The MM74HC04 is a triple buffered inverter. It has high

noise immunity and the ability to drive 10 LS-TTL loads.

The 74HC logic family is functionally as well as pin-out

compatible with the standard 74LS logic family. All inputs

are protected from damage due to static discharge by

internal diode clamps to V

and ground.

Ordering Information

Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering number.

All pac

kages are lead free per JEDEC:

J-STD-020B standard.

Connection Diagram

Pin Assignments for DIP, SOIC, SOP and TSSOP

Top View

Logic Diagram

1 of 6 Inverters

Order Number

ckage

Number Package Description

MM74HC04M M14A

14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow

MM74HC04SJ M14D 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide

MM74HC04MTC MTC14 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide

MM74HC04N N14A 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide

Summary of content (5 pages)

PAGE 1
General Description Features ■ Typical propagation delay: 8ns ■ Fan out of 10 LS-TTL loads ■ Quiescent power consumption: 10µW maximum at room temperature Low input current: 1µA maximum ■ The MM74HC04 inverters utilize advanced silicon-gate CMOS technology to achieve operating speeds similar to LS-TTL gates with the low power consumption of standard CMOS integrated circuits. The MM74HC04 is a triple buffered inverter. It has high noise immunity and the ability to drive 10 LS-TTL loads.
PAGE 2
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol Parameter Rating VCC Supply Voltage VIN DC Input Voltage –1.5 to VCC+1.5V DC Output Voltage –0.5 to VCC+0.
PAGE 3
TA = 25°C Parameter VCC (V) VIH Minimum HIGH Level Input Voltage 2.0 1.5 1.5 1.5 4.5 3.15 3.15 3.15 6.0 4.2 4.2 4.2 2.0 0.5 0.5 0.5 4.5 1.35 1.35 1.35 6.0 1.8 1.8 1.8 2.0 1.9 1.9 1.9 4.5 4.4 4.4 4.4 6.0 5.9 5.9 5.9 VOH Maximum LOW Level Input Voltage Minimum HIGH Level Output Voltage 2.0 4.5 VIN = VIL, |IOUT| ≤ 20µA 6.0 VOL Maximum LOW Level Output Voltage Typ. TA = –55°C to 125°C Symbol VIL Conditions TA = –40°C to 85°C Guaranteed Limits 4.
PAGE 4
VCC = 5V, TA = 25°C, CL = 15pF, tr = tf = 6ns Symbol tPHL, tPLH Parameter Conditions Maximum Propagation Delay Typ. Guaranteed Limit Units 8 15 ns AC Electrical Characteristics VCC = 2.0V to 6.
PAGE 5
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.