Data Sheet

ManualsBrandsON SEMICONDUCTOR ManualsDiodesSchottky rectifier DO 214AA 40 V

May, 2017 − Rev. 11

1 Publication Order Number:

MBRS140T3/D

MBRS140T3G,

SBRS8140T3G

SBRS140T3G

Surface Mount

Schottky Power Rectifier

Schottky Power Rectifiers employ the use of the Schottky Barrier

principle in a large area metal−to−silicon power diode.

State−of−the−art geometry features epitaxial construction with oxide

passivation and metal overlay contact. Ideally suited for low voltage,

high frequency rectification, or as free wheeling and polarity

protection diodes in surface mount applications where compact size

and weight are critical to the system.

Features

• Small Compact Surface Mountable Package with J−Bend Leads

• Rectangular Package for Automated Handling

• Highly Stable Oxide Passivated Junction

• Very Low Forward Voltage Drop

(0.55 V Max @ 1.0 A, T

= 25°C)

• Excellent Ability to Withstand Reverse Avalanche Energy Transients

• Guardring for Stress Protection

• ESD Ratings:

♦ Human Body Model = 3B (> 8000 V)

♦ Machine Model = C (> 400 V)

• SBRS8 Prefix for Automotive and Other Applications Requiring

Unique Site and Control Change Requirements; AEC−Q101

Qualified and PPAP Capable*

• These are Pb−Free Devices

Mechanical Characteristics

• Case: Epoxy, Molded

• Weight: 95 mg (approximately)

• Finish: All External Surfaces Corrosion Resistant and Terminal

Leads are Readily Solderable

• Lead and Mounting Surface Temperature for Soldering Purposes:

260°C Max. for 10 Seconds

• Cathode Polarity Band

Device Package Shipping

†

ORDERING INFORMATION

SMB

CASE 403A

SCHOTTKY BARRIER

RECTIFIER

1.0 AMPERE, 40 VOLTS

MARKING DIAGRAM

MBRS140T3G SMB

(Pb−Free)

2,500 /

Tape & Reel

†For information on tape and reel specifications,

including part orientation and tape sizes, please

refer to our Tape and Reel Packaging Specifications

Brochure, BRD8011/D.

www.onsemi.com

(Note: Microdot may be in either location)

AYWW

B14 G

SBRS8140T3G* SMB

(Pb−Free)

2,500 /

Tape & Reel

**The Assembly Location code (A) is front side

optional. In cases where the Assembly Location is

stamped in the package, the front side assembly

code may be blank.

B14 = Specific Device Code

A = Assembly Location**

Y = Year

WW = Work Week

G = Pb−Free Pac

SBRS140T3G SMB

(Pb−Free)

2,500 /

Tape & Reel

Summary of content (4 pages)

PAGE 1
MBRS140T3G, SBRS8140T3G SBRS140T3G Surface Mount Schottky Power Rectifier Schottky Power Rectifiers employ the use of the Schottky Barrier principle in a large area metal−to−silicon power diode. State−of−the−art geometry features epitaxial construction with oxide passivation and metal overlay contact. Ideally suited for low voltage, high frequency rectification, or as free wheeling and polarity protection diodes in surface mount applications where compact size and weight are critical to the system. www.
PAGE 2
MBRS140T3G, SBRS8140T3G MAXIMUM RATINGS Symbol Value Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Rating VRRM VRWM VR 40 V Average Rectified Forward Current TL = 115°C IF(AV) Non−Repetitive Peak Surge Current (Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hz) IFSM Operating Junction Temperature A 1.0 A 40 TJ −65 to +125 °C Stresses exceeding those listed in the Maximum Ratings table may damage the device.
PAGE 3
200 180 TJ = 125°C NOTE: TYPICAL CAPACITANCE AT 0 V = 160 pF C, CAPACITANCE (pF) 160 100°C 75°C 25°C 140 120 100 80 60 40 20 0 4 8 12 16 20 24 28 32 36 0 40 0 4 8 12 16 20 24 28 32 VR, REVERSE VOLTAGE (VOLTS) VR, REVERSE VOLTAGE (VOLTS) Figure 3. Typical Reverse Current Figure 4. Typical Capacitance I F(AV) , AVERAGE FORWARD CURRENT (AMPS) 100 50 30 20 10 5 3 2 1 0.5 0.3 0.2 0.1 0.05 0.03 0.02 0.
PAGE 4
MBRS140T3G, SBRS8140T3G PACKAGE DIMENSIONS SMB CASE 403A−03 ISSUE J HE NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION b SHALL BE MEASURED WITHIN DIMENSION L1. E b DIM A A1 b c D E HE L L1 D POLARITY INDICATOR OPTIONAL AS NEEDED MIN 1.95 0.05 1.96 0.15 3.30 4.06 5.21 0.76 MILLIMETERS NOM MAX 2.30 2.47 0.10 0.20 2.03 2.20 0.23 0.31 3.56 3.95 4.32 4.60 5.44 5.60 1.02 1.60 0.51 REF MIN 0.077 0.002 0.077 0.006 0.130 0.160 0.205 0.