Datasheet

ManualsBrandsON Semiconductor ManualsDiscrete SemiconductorsTriac TO-220AB 800 V 15 A

 Semiconductor Components Industries, LLC, 1999

February, 2000 – Rev. 1

1 Publication Order Number:

MAC15A4/D

MAC15 Series

Preferred Device

Triacs

Silicon Bidirectional Thyristors

Designed primarily for full-wave ac control applications, such as

solid–state relays, motor controls, heating controls and power

supplies; or wherever full–wave silicon gate controlled solid–state

devices are needed. Triac type thyristors switch from a blocking to a

conducting state for either polarity of applied main terminal voltage

with positive or negative gate triggering.

• Blocking Voltage to 800 Volts

• All Diffused and Glass Passivated Junctions for Greater Parameter

Uniformity and Stability

• Small, Rugged, Thermowatt Construction for Low Thermal

Resistance, High Heat Dissipation and Durability

• Gate Triggering Guaranteed in Three Modes (MAC15 Series) or

Four Modes (MAC15A Series)

• Device Marking: Logo, Device Type, e.g., MAC15A6, Date Code

MAXIMUM RATINGS (T

= 25°C unless otherwise noted)

Rating

Symbol Value Unit

Peak Repetitive Off–State Voltage

(1)

= –40 to +125°C, Sine Wave 50 to

60 Hz, Gate Open)

MAC15A6

MAC15–8, MAC15A8

MAC15–10, MAC15A10

DRM,

RRM

400

600

800

Volts

Peak Gate Voltage

(Pulse Width

1.0 µsec; T

= 90°C)

10 Volts

On–State Current RMS

Full Cycle Sine Wave 50 to 60 Hz

= +90°C)

T(RMS)

15 A

Circuit Fusing Consideration (t = 8.3 ms) I

t 93 A

Peak Non–repetitive Surge Current

(One Full Cycle Sine Wave,

60 Hz, T

= +80°C)

Preceded and followed by rated current

TSM

150 A

Peak Gate Power (T

= +80°C,

Pulse Width = 1.0 µs)

20 Watts

Average Gate Power

= +80°C, t = 8.3 ms)

G(AV)

0.5 Watts

Peak Gate Current

(Pulse Width

1.0 µsec; T

= 90°C)

2.0 A

Operating Junction Temperature Range T

–40 to

+125

°C

Storage Temperature Range T

stg

–40 to

+150

°C

(1) V

DRM

and V

RRM

for all types can be applied on a continuous basis. Blocking

voltages shall not be tested with a constant current source such that the

voltage ratings of the devices are exceeded.

TRIACS

15 AMPERES RMS

400 thru 800 VOLTS

Device Package Shipping

ORDERING INFORMATION

MAC15–8 TO220AB 500/Box

MAC15–10 TO220AB

MAC15A6 TO220AB

TO–220AB

CASE 221A

STYLE 4

PIN ASSIGNMENT

3 Gate

Main Terminal 1

Main Terminal 2

http://onsemi.com

500/Box

MT1

MT2

MAC15A8 TO220AB 500/Box

MAC15A10 TO220AB 500/Box

Preferred devices are recommended choices for future use

and best overall value.

Summary of content (8 pages)

PAGE 1
MAC15 Series Preferred Device Triacs Silicon Bidirectional Thyristors Designed primarily for full-wave ac control applications, such as solid–state relays, motor controls, heating controls and power supplies; or wherever full–wave silicon gate controlled solid–state devices are needed. Triac type thyristors switch from a blocking to a conducting state for either polarity of applied main terminal voltage with positive or negative gate triggering.
PAGE 2
MAC15 Series THERMAL CHARACTERISTICS Characteristic Thermal Resistance — Junction to Case Thermal Resistance — Junction to Ambient Maximum Lead Temperature for Soldering Purposes 1/8″ from Case for 10 Seconds Symbol Value Unit RθJC RθJA 2.0 62.5 °C/W TL 260 °C ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise noted; Electricals apply in both directions) Characteristic Symbol Min Typ Max Unit IDRM, IRRM — — — — 10 2.0 µA mA VTM — 1.3 1.
PAGE 3
MAC15 Series Voltage Current Characteristic of Triacs (Bidirectional Device) + Current Symbol Parameter VDRM IDRM Peak Forward Blocking Current VRRM IRRM VTM IH VTM Peak Repetitive Forward Off State Voltage Quadrant 1 MainTerminal 2 + on state IH IRRM at VRRM Peak Repetitive Reverse Off State Voltage Peak Reverse Blocking Current Maximum On State Voltage off state IH Holding Current Quadrant 3 VTM MainTerminal 2 – Quadrant Definitions for a Triac MT2 POSITIVE (Positive Half Cycle) + (+) MT2
PAGE 4
MAC15 Series 20 PAV, AVERAGE POWER (WATTS) TC, CASE TEMPERATURE (°C) 130 α = 30° α = 60° 120 α = 90° 110 α = 180° 100 dc α 90 α TJ ≈ 125° α = CONDUCTION ANGLE 80 0 2 4 6 120° TJ ≈ 125° 16 dc 90° α 12 60° α 30° 8 α = CONDUCTION ANGLE 4 0 8 10 12 14 16 0 2 4 6 8 10 12 14 IT(RMS), RMS ON–STATE CURRENT (AMP) IT(RMS), ON–STATE CURRENT (AMP) Figure 1. RMS Current Derating Figure 2. On–State Power Dissipation 1.
PAGE 5
MAC15 Series 100 20 I H, HOLDING CURRENT (mA) 50 TJ = 25°C 125°C 30 i TM, INSTANTANEOUS FORWARD CURRENT (AMP) 20 GATE OPEN MAIN TERMINAL #1 POSITIVE 70 10 7.0 5.0 MAIN TERMINAL #2 POSITIVE 3.0 10 2.0 –60 7 –40 –20 0 20 40 60 80 100 120 140 TJ, JUNCTION TEMPERATURE (°C) 5 Figure 6. Typical Holding Current 3 2 TSM, PEAK SURGE CURRENT (AMP) 300 1 0.7 0.5 0.3 0.2 200 100 70 TC = 80°C T f = 60 Hz 50 Surge is preceded and followed by rated current 0.1 0.4 30 0.8 1.2 1.6 2 2.
PAGE 6
MAC15 Series PACKAGE DIMENSIONS TO–220AB CASE 221A–07 ISSUE Z –T– B F T SEATING PLANE C S 4 Q A U 1 2 3 H K Z R L V J G D N NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. DIM A B C D F G H J K L N Q R S T U V Z INCHES MIN MAX 0.570 0.620 0.380 0.405 0.160 0.190 0.025 0.035 0.142 0.147 0.095 0.105 0.110 0.155 0.014 0.022 0.500 0.562 0.045 0.060 0.190 0.210 0.100 0.
PAGE 7
MAC15 Series Notes http://onsemi.
PAGE 8
MAC15 Series ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein.