Data Sheet

©2005 Fairchild Semiconductor Corporation www.fairchildsemi.com
6N135, 6N136, HCPL2503, HCPL4502, HCPL2530, HCPL2531 Rev. 1.0.7 2
Single-Channel: 6N135, 6N136 , HCPL2503, HCPL4502 Dual-Channel: HCPL2530, HCPL2531 — High Speed Transistor Optocouplers
Absolute Maximum Ratings
(T
A
= 25°C unless otherwise specified)
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
Notes:
1. Derate linearly above 70°C free-air temperature at a rate of 0.8mA/°C.
2. Derate linearly above 70°C free-air temperature at a rate of 1.6mA/°C.
3. Derate linearly above 70°C free-air temperature at a rate of 0.9 mW/°C.
4. Derate linearly above 70°C free-air temperature at a rate of 2.0 mW/°C.
Symbol Parameter Condition Value Units
T
STG
Storage Temperature -55 to +125 °C
T
OPR
Operating Temperature -55 to +100 °C
T
SOL
Lead Solder Temperature 260 for 10 sec °C
EMITTER
I
F
(avg) DC/Average Forward Input
Current Each Channel
(1)
25 mA
I
F
(pk) Peak Forward Input Current
Each Channel
(2)
50% duty cycle, 1ms P.W. 50 mA
I
F
(trans) Peak Transient Input Current
Each Channel
≤ 1µs P.W., 300pps 1.0 A
V
R
Reverse Input Voltage Each
Channel
5V
P
D
Input Power Dissipation Each
Channel
6N135/6N136 and HCPL2503/4502 100 mW
HCPL-2530/253
(3)
45
DETECTOR
I
O
(avg) Average Output Current Each
Channel
8 mA
I
O
(pk) Peak Output Current Each
Channel
16 mA
V
EBR
Emitter-Base Reverse Voltage 6N135, 6N136 and HCPL2503 only 5 V
V
CC
Supply Voltage -0.5 to 30 V
V
O
Output Voltage -0.5 to 20 V
I
B
Base Current 6N135, 6N136 and HCPL2503 only 5 mA
PD Output Power Dissipation
Each Channel
6N135, 6N136, HCPL2503, HCPL4502
(4)
100 mW
HCPL2530, HCPL2531 35 mW