Data Sheet

FSBB20CH60CL Motion SPM® 3 Series

January 2014

FSBB20CH60CL Rev. C3

FSBB20CH60CL

Motion SPM

3 Series

Features

• UL Certified No. E209204 (UL1557)

• 600 V - 20 A 3-Phase IGBT Inverter with Integral Gate

Drivers and Protection

• Low-Loss, Short-Circuit Rated IGBTs

• Very Low Thermal Resistance Using Al

DBC Sub-

strate

• Built-In Bootstrap Diodes and Dedicated Vs Pins Sim-

plify PCB Layout

• Separate Open-Emitter Pins from Low-Side IGBTs for

Three-Phase Current Sensing

• Single-Grounded Power Supply

• Isolation Rating: 2500 V

rms

/ min.

• Short Lead Length Version of FSBB20CH60C

Applications

• Motion Control - Home Appliance / Industrial Motor

Related Resources

• AN-9044 - Motion SPM® 3 Series Users Guide

General Description

FSBB20CH60CL is an advanced Motion SPM

3 mod-

ule providing a fully-featured, high-performance inverter

output stage for AC Induction, BLDC, and PMSM

motors. These modules integrate optimized gate drive of

the built-in IGBTs to minimize EMI and losses, while also

providing multiple on-module protection features includ-

ing under-voltage lockouts, over-current shutdown, and

fault reporting. The built-in, high-speed HVIC requires

only a single supply voltage and translates the incoming

logic-level gate inputs to the high-voltage, high-current

drive signals required to properly drive the module's

internal IGBTs. Separate negative IGBT terminals are

available for each phase to support the widest variety of

control algorithms.

Package Marking and Ordering Information

Figure 1. Package Overview

Device Device Marking Package Packing Type Quantity

FSBB20CH60CL FSBB20CH60CL SPMCG-027 Rail 10