Data Sheet

FSBB15CH60C Motion SPM® 3 Series
February 2016
1 www.fairchildsemi.com©2008 Fairchild Semiconductor Corporation
FSBB15CH60C Rev. 1.6
FSBB15CH60C
Motion SPM
®
3 Series
Features
• UL Certified No. E209204 (UL1557)
• 600 V - 15 A 3-Phase IGBT Inverter with Integral Gate
Drivers and
Protection
• Low-Loss, Short-Circuit Rated IGBTs
• Very Low Thermal Resistance Using Al
2
O
3
DBC Sub-
strate
• Built-in Bootstrap Diodes and Dedicated Vs Pins Sim-
plify PCB Layout
• Separate Open-Emitter Pins from Low-Side IGBTs for
Three-Phase Current Sensing
• Single-Grounded Power Supply
• Isolation Rating: 2500 V
rms
/ min.
Applications
• Motion Control - Home Appliance / Industrial Motor
Related Resources
• AN-9044 - Motion SPM® 3 Series Users Guide
General Description
FSBB15CH60C is an advanced Motion SPM
®
3 module
providing a fully-featured, high-performance inverter out-
put stage for AC Induction, BLDC, and PMSM mo
tors.
These modules integrate optimized gate drive of
the built-in IGBTs to minimize EMI and losses, while also
providing multiple on-module protection features includ-
ing under-voltage lockouts, over-current shutdown, and
fault reporting
. The built-in, high-speed HVIC requires
only a single supply voltage and translates the incoming
logic-level gate inputs to the high-voltage, high-current
drive signals required to properly drive the module's
internal IGBTs. Separate negative IGBT terminals are
available for each phase to support the widest variety of
control algorithms.
Figure 1. Package Overview
Package Marking and Ordering Information
Device Device Marking Package Packing Type Quantity
FSBB15CH60C FSBB15CH60C SPMCC-027 Rail 10