Data Sheet

www.onsemi.com
3
FSA2567 — Low-Power, Dual SIM Card Analog Switch
Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable
above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition,
extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute
maximum ratings are stress ratings only.
Symbol Parameter Min. Max. Unit
V
CC
Supply Voltage -0.5 +5.5 V
V
CNTRL
DC Input Voltage (Sel)
(1)
-0.5 V
CC
V
V
SW
DC Sw itch I/O Voltage
(1)
-0.5 V
CC
+ 0.3 V
I
IK
DC Input Diode Current -50 mA
I
SIM
DC Output Current - V
SIM
350 mA
I
OUT
DC Output Current – DAT, CLK, RST 35 mA
T
STG
Storage Temperature -65 +150 °C
ESD
Human Body Model, JEDEC: JESD22-A114
All Pins 3
kV
I/O to GND 12
Charged Device Model, JEDEC: JESD22-C101 2
Note :
1. The input and output negative ratings may be exceeded if the input and output diode current ratings are observed.
Recommended Operating Conditions
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. ON Semiconductor
does not recommend exceeding them or designing to Absolute Maximum Ratings.
Symbol Parameter Min. Max. Unit
V
CC
Supply Voltage 1.65 4.30 V
V
CNTRL
Control Input Voltage (Sel)
(2)
0 V
CC
V
V
SW
Sw itch I/O Voltage -0.5 V
CC
V
I
SIM
DC Output Current - V
SIM
150 mA
I
OUT
DC Output Current – DAT, CLK, RST 25 mA
T
A
Operating Temperature -40 +85 °C
Note :
2. The control input must be held HIGH or LOW; it must not float.