Data Sheet

FODM8801X — OptoHiT™ Series, High-Temperature Phototransistor Optocoupler in Half-Pitch Mini-Flat 4-Pin Package
Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only. T
A
= 25°C unless otherwise specified.
Notes:
2.Derate linearly from 73°C at a rate of 0.24 mW/°C
3.Derate linearly from 73°C at a rate of 2.23 mW/°C.
4.Functional operation under these conditions is not implied. Permanent damage may occur if the device is subjected
to conditions outside these ratings.
Recommended Operating Conditions
The Recommended Operating Conditions table defines
the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. ON Semiconductor
does not recommend exceeding them or designing to absolute maximum ratings.
Isolation Characteristics
Notes:
5.Device is considered a two-terminal device: pins 1 and 2 are shorted together and pins 3 and 4 are shorted together.
6.3,750 VAC
RMS
for 1 minute is equivalent to 4,500 VAC
RMS
for 1 second.
Symbol Parameter Value Unit
Total Package
T
STG
Storage Temperature -40 to +150 °C
T
OPR
Operating Temperature -40 to +125 °C
T
J
Junction Temperature -40 to +140 °C
T
SOL
Lead Solder Temperature 245 for 10 s °C
Emitter
I
F(average)
Continuous Forward Current 20 mA
V
R
Reverse Input Voltage 6 V
PD
LED
Power Dissipation
(2)(4)
40 mW
Detector
I
C(average)
Continuous Collector Current 30 mA
V
CEO
Collector-Emitter Voltage 75 V
V
ECO
Emitter-Collector Voltage 7 V
PD
C
Collector Power Dissipation
(3)(4)
150 mW
Symbol Parameter Value Unit
T
A
Operating Temperature -40 to +125 °C
V
FL(OFF)
Input Low Voltage -5.0 to +0.8 V
I
FH
Input High Forward Current 1 to 10 mA
Symbol Parameter Conditions Min. Typ. Max. Unit
V
ISO
Input-Output Isolation Voltage
f = 60 Hz, t = 1 min., I
I-O
 10 µA
(5)(6)
3,750
VAC
RMS
R
ISO
Isolation Resistance
V
I-O
= 500 V
(5)
10
12

C
ISO
Isolation Capacitance f = 1 MHz 0.3 0.5 pF
www.onsemi.com
3