Data Sheet

FAN7093_F085
High Current PN Half Bridge
December 2011
5 General Product Characteristics
5.1 Absolute Maximum Ratings
Absolute Maximum Ratings
1)
T
j
= -40 °C to +150 °C; all voltages with respect to ground, positive current flowing into pin (unless
otherwise specified)
Pos. Parameter
Symbol
Min. Typ. Max. Unit Conditions
5.1.1 Supply Voltage
V
BATT
-0.3 45 V –
5.1.2 Logic Input Voltage
V
IN
(H)
-0.3 45 V –
5.1.3 Voltage at SR Pin
V
SR
-0.3 1.5 V –
5.1.4 Voltage at IS Pin
V
IS
-0.3 7.5 V –
5.1.5
HS/LS Continuous Drain Current
2)
I
D(HS)
I
D(LS)
-46/46
A
T
C
< 85°C
5.1.6
HS/LS Pulsed Drain Current
2)
I
D(HS)
I
D(LS)
-90/90
A
T
C
< 85°C
single pulse < 5us
5.1.7
HS/LS PWM Current
2)
I
D(HS)
I
D(LS)
-55/55
A
T
C
< 125°C
f = 1kHz, DC = 50%
Temperatures
5.1.8
Junction Temperature
T
j
-40 150 °C –
5.1.9
Storage Temperature
T
stg
-55 150 °C –
ESD Susceptibility
5.
1.1
0
IN,

, SR, IS
V
ESD
-
2
2
kV
HBM
3)
5.1.11
OUT, GND,
V
BATT
V
ESD
-6 6 kV
HBM
3)
1) Not subject to production test, specified by design
2) Maximum reachable current may be smaller depending on current limitation level
3) ESD susceptibility, HBM according to AEC_Q100-004C /JESD22-A114-B (1.5 kΩ, 100 pF)
Note: Stresses above the ones listed here may cause permanent damage to the device. Exposure to absolute maximum
rating conditions for extended periods may affect device reliability.
Note: Integrated protection functions are designed to prevent IC destruction under fault conditions described in the data
sheet. Fault conditions are considered as “outside” normal operating range. Protection functions are not designed for
continuous repetitive operation
FAN7093_F085 Rev. C1 www.fairchildsemi.com5