Data Sheet

www.onsemi.com
4
FAN7081-GF085 High Side Gate Driver
Statics Electrical Characteristics
Unless otherwise specified, -40°C <= Ta <= 125°C,VCC = 15V, VBS = 15V, VS = 0V, RL = 50, CL = 2.5nF.
Parameter Symbol Conditions Min. Typ. Max. Unit
Vcc and VBS supply Characteristics
V
CC and VBS supply under voltage
positive going threshold
VCCUV+
VBSUV+
- 8.7 9.8 V
V
CC and VBS supply under voltage
negative going threshold
VCCUV-
V
BSUV-
7.4 8.2 - V
V
CC and VBS supply under voltage
hysteresis
VCCUVH
VBSUVH
- 0.2 0.5 - V
Under voltage lockout response time tduvcc
tduvbs
VCC: 10V-->7.3V or 7.3V-->10V
VBS: 10V-->7.3V or 7.3V-->10V
0.5
0.5
20
20
us
us
Offset supply leakage current I
LK VB=VS=600V - - 50 uA
Quiescent V
BS supply current IQBS VIN=0 - 23 250 uA
Quiescent Vcc supply current I
QCC1 VIN= 0V - 42 120 uA
Quiescent Vcc supply current I
QCC2 VIN=15V - 25 100 uA
Input Characteristics
High logic level input voltage V
IH 0.63VCC - - V
Low logic level input voltage V
IL - - 0.4VCC V
Low logic level input bias current for IN I
IN+ VIN=0 - 15 50 uA
High logic level input bias current for IN II
N- VIN=15V - 0 1 uA
Output characteristics
High level output voltage, V
BIAS-VO VOH IO=0 - - 0.1 V
Low level output voltage, V
O VOL IO=0 - - 0.1 V
Peak output source current I
O1+ 250 - - mA
Peak output sink current I
O1- 500 - - mA
Equivalent output resistance R
OP 40 60 
R
ON 20 30 
Note: The input parameter are referenced to COM. The VO and IO parameters are referenced to COM.