Data Sheet

© 2005 Fairchild Semiconductor Corporation DS500029 www.fairchildsemi.com
July 1997
Revised April 2005
74VHCT574A Octal D-Type Flip-Flop with 3-STATE Outputs
74VHCT574A
Octal D-Type Flip-Flop with 3-STATE Outputs
General Description
The VHCT574A is an advanced high speed CMOS octal
flip-flop with 3-STATE output fabricated with silicon gate
CMOS technology. It achieves the high speed operation
similar to equivalent Bipolar Schottky TTL while maintain-
ing the CMOS low power dissipation. This 8-bit D-type flip-
flop is controlled by a clock input (CP) and an Output
Enable input (OE
). When the OE input is HIGH, the eight
outputs are in a high impedance state.
Protection circuits ensure that 0V to 7V can be applied to
the input and output (Note 1) pins without regard to the
supply voltage. This device can be used to interface 3V to
5V systems and two supply systems such as battery back
up. This circuit prevents device destruction due to mis-
matched supply and input voltages.
Note 1: Outputs in OFF-State.
Features
■ High speed: f
MAX
140 MHz (typ) at T
A
25 C
■ Power Down Protection is provided on all inputs and
outputs.
■ Low Noise: V
OLP
1.6V (max)
■ Low Power Dissipation:
I
CC
4 A (max) @ T
A
25 C
■ Pin and Function Compatible with 74HCT574
Ordering Code:
Surface mount packages are also available on Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.
Pb-Free package per JEDEC J-STD-020B.
Logic Symbol
IEEE/IEC
Connection Diagram
Order Number Package Number Package Description
74VHCT574AM M20B 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide
74VHCT574ASJ M20D Pb-Free 20-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide
74VHCT574AMTC MTC20 20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
74VHCT574AN N20A 20-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide