Data Sheet

ManualsBrandsON SEMICONDUCTOR ManualsLogic ICsLogic IC - Gate and inverter NAND gate 74ACT TSSOP 14

74AC00, 74ACT00 — Quad 2-Input NAND Gate

Publication Order Number:

74ACT00/D

November-2017, Rev. 2

74AC00, 74ACT00

Quad 2-Input NAND Gate

Features

■

reduced by 50%

■

Outputs source/sink 24mA

■

ACT00 has TTL-compatible inputs

General Description

The AC00/ACT00 contains four, 2-input NAND gates.

Ordering Inf

ormation

Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering number.

All packages are lead free per JEDEC:

J-STD-020B standard.

Connection Diagram

Pin Description

Logic Symbol

IEEE/IEC

Order

Number

ckage

Number Package Description

74AC00SC M14A

14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow

74AC00SJ M14D 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide

74AC00MTC MTC14 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm

Wide

74AC00PC N14A 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide

74ACT00SC M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow

74ACT00SJ M14D 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide

74ACT00MTC MTC14 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm

Wide

74ACT00PC N14A 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide

Pin Names Description

, B

Inputs

Outputs

Summary of content (6 pages)

PAGE 1
Features General Description ■ ICC reduced by 50% The AC00/ACT00 contains four, 2-input NAND gates. ■ Outputs source/sink 24mA ■ ACT00 has TTL-compatible inputs Ordering Information Order Number Package Number Package Description 74AC00SC M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow 74AC00SJ M14D 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 74AC00MTC MTC14 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.
PAGE 2
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol VCC IIK Parameter Supply Voltage Rating –0.5V to +7.0V DC Input Diode Current VI = –0.5V –20mA VI = VCC + 0.
PAGE 3
Symbol VIH Parameter Minimum HIGH Level Input Voltage VCC (V) 3.0 TA = +25°C Typ. Conditions VOUT = 0.1V or VCC – 0.1V Maximum LOW Level Input Voltage VOH Units 2.1 2.1 2.25 3.15 3.15 2.75 3.85 3.85 1.5 0.9 0.9 2.25 1.35 1.35 2.75 1.65 1.65 2.99 2.9 2.9 4.5 4.49 4.4 4.4 5.5 5.49 5.4 5.4 2.56 2.46 3.86 3.76 4.86 4.76 0.002 0.1 0.1 4.5 0.001 0.1 0.1 5.5 0.001 0.1 0.1 0.36 0.44 0.36 0.44 0.36 0.44 ±0.1 ±1.0 µA 4.5 3.0 4.5 VOUT = 0.1V or VCC – 0.
PAGE 4
Symbol VIH VIL VOH Parameter VCC (V) Conditions Typ. TA = –40°C to +85°C Guaranteed Limits VOUT = 0.1V or VCC – 0.1V 1.5 2.0 2.0 1.5 2.0 2.0 VOUT = 0.1V or VCC – 0.1V 1.5 0.8 0.8 5.5 1.5 0.8 0.8 4.5 IOUT = –50µA 4.49 4.4 4.4 Minimum HIGH Level Input Voltage 5.5 Maximum LOW Level Input Voltage Minimum HIGH Level Output Voltage TA = +25°C 4.5 4.5 5.5 4.5 5.49 VIN = VIL or VIH, 5.4 5.4 3.86 3.76 4.86 4.76 0.1 0.1 Units V V V IOH = –24mA 5.
PAGE 5
TA = +25°C, CL = 50pF Symbol tPLH tPHL Parameter Propagation Delay Propagation Delay TA = –40°C to +85°C, CL = 50pF VCC (V)(6) Min. Typ. Max. Min. Max. Units 3.3 2.0 7.0 9.5 2.0 10.0 ns 5.0 1.5 6.0 8.0 1.5 8.5 3.3 1.5 5.5 8.0 1.0 8.5 5.0 1.5 4.5 6.5 1.0 7.0 ns Note: 6. Voltage range 3.3 is 3.3V ± 0.3V. Voltage range 5.0 is 5.0V ± 0.5V. AC Electrical Characteristics for ACT TA = +25°C, CL = 50pF Symbol Parameter TA = –40°C to +85°C, CL = 50pF VCC (V)(7) Min. Typ.
PAGE 6
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.