Data Sheet
©2009 Fairchild Semiconductor Corporation www.fairchildsemi.com
6N137M, HCPL26XXM Rev. 1.6 3
Dual-Channel: HCPL2630M, HCPL2631M — 8-Pin DIP High-Speed 10 MBit/s Logic Gate Optocouplers
Single-Channel: 6N137M, HCPL2601M, HCPL2611M
Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only. T
A
= 25°C unless otherwise specified.
Recommended Operating Conditions
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not
recommend exceeding them or designing to absolute maximum ratings.
Note:
3. 6.3 mA is a guard banded value which allows for at least 20% CTR degradation. Initial input current threshold value
is 5.0 mA or less.
Symbol Parameter Value Unit
T
STG
Storage Temperature -40 to +125 °C
T
OPR
Operating Temperature -40 to +100 °C
T
J
Junction Temperature -40 to +125 °C
T
SOL
Lead Solder Temperature 260 for 10 sec °C
Symbol Parameter Device Value Unit
EMITTER
I
F
(avg) DC/Average Forward Input Current Per Channel
Single Channel 50
mA
Dual Channel 30
V
E
Enable Input Voltage Not to Exceed V
CC
by more than 500 mV
Single Channel 5.5 V
V
R
Reverse Input Voltage Per Channel All 5.0 V
P
I
Input Power Dissipation Per Channel
Single Channel 100
mW
Dual Channel 45
DETECTOR
V
CC
Supply Voltage All -0.5 to 7.0 V
I
O
(avg) Average Output Current Per Channel All 25 mA
I
O
(pk) Peak Output Current Per Channel All 50
mA
V
O
Output Voltage Per Channel All -0.5 to 7.0 V
P
O
Output Power Dissipation Per Channel
Single Channel 85
mW
Dual Channel 60
Symbol Parameter Min. Max. Unit
V
CC
Supply Voltage 4.5 5.5 V
I
FL
Input Current, Low Level 0 250 µA
I
FH
Input Current, High Level 6.3
(3)
20.0 mA
V
EL
Enable Voltage, Low Level 0 0.8 V
V
EH
Enable Voltage, High Level 2.0 V
CC
V
T
A
Ambient Operating Temperature -40 +85 °C
N Fan Out (TTL load) 8