Data Sheet

©2008 Fairchild Semiconductor Corporation www.fairchildsemi.com
6N13XM, HCPLXXXXM Rev. 1.7 3
Dual-Channel: HCPL2530M, HCPL2531M — 8-Pin DIP High Speed Transistor Optocouplers
Single-Channel: 6N135M, 6N136M, HCPL4503M
Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
T
A
= 25°C unless otherwise specified.
Notes:
2. Derate linearly above 70°C free-air temperature at a rate of 0.8 mA/°C.
3. Derate linearly above 70°C free-air temperature at a rate of 1.6 mA/°C.
4. Derate linearly above 70°C free-air temperature at a rate of 0.9 mW/°C.
5. Derate linearly above 70°C free-air temperature at a rate of 2.0 mW/°C.
Recommended Operating Conditions
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended
operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not
recommend exceeding them or designing to absolute maximum ratings.
Note:
6. 6.3 mA is a guard banded value which allows for at least 20% CTR degradation. Initial input current threshold value
is 5.0 mA or less.
Symbol Parameter Test Conditions Value Unit
T
STG
Storage Temperature -40 to +125 °C
T
OPR
Operating Temperature -40 to +100 °C
T
J
Junction Temperature -40 to +125 °C
T
SOL
Lead Solder Temperature 260 for 10 sec °C
EMITTER
I
F
(avg)
DC/Average Forward Input Current
Each Channel
(2)
25 mA
I
F
(pk)
Peak Forward Input Current
Each Channel
(3)
50% Duty Cycle,
1 ms P.W.
50 mA
I
F
(trans) Peak Transient Input Current Each Channel
≤ 1 μs P.W., 300 pps
1.0 A
V
R
Reverse Input Voltage Each Channel 5 V
P
D
Input Power Dissipation Each Channel
(4)
45 mW
DETECTOR
I
O
(avg) Average Output Current Each Channel 8 mA
I
O
(pk) Peak Output Current Each Channel 16 mA
V
EBR
Emitter-Base Reverse Voltage 6N135M and 6N136M 5 V
V
CC
Supply Voltage -0.5 to 30 V
V
O
Output Voltage -0.5 to 20 V
I
B
Base Current 6N135M and 6N136M 5 mA
P
D
Output Power Dissipation Each Channel
(5)
100 mW
Symbol Parameter Min. Max. Unit
V
CC
Supply Voltage 4.5 20.0 V
T
A
Ambient Operating Temperature 0 70 °C
I
FL
Input Current, Low Level 0 250 μA
I
FH
Input Current, High Level
(6)
6.3 20.0 mA