Data Sheet

ManualsBrandsON SEMICONDUCTOR ManualsDiodesStandard diode DO 201AD 100 V

May, 2008 − Rev. 10

1 Publication Order Number:

1N5400/D

1N5400 thru 1N5408

1N5404 and 1N5406 are Preferred Devices

Axial-Lead Standard

Recovery Rectifiers

Lead mounted standard recovery rectifiers are designed for use in

power supplies and other applications having need of a device with the

following features:

Features

• High Current to Small Size

• High Surge Current Capability

• Low Forward Voltage Drop

• Void−Free Economical Plastic Package

• Available in Volume Quantities

• Plastic Meets UL 94 V−0 for Flammability

• These are Pb−Free Devices

Mechanical Characteristics:

• Case: Epoxy, Molded

• Weight: 1.1 Gram (Approximately)

• Finish: All External Surfaces Corrosion Resistant and Terminal

Leads are Readily Solderable

• Lead and Mounting Surface Temperature for Soldering Purposes:

260°C Max. for 10 Seconds

• Polarity: Cathode Indicated by Polarity Band

*For additional information on our Pb−Free strategy and soldering details, please

download the ON Semiconductor Soldering and Mounting Techniques

Reference Manual, SOLDERRM/D.

STANDARD RECOVERY

RECTIFIERS

50−1000 VOLTS

3.0 AMPERES

AXIAL LEAD

CASE 267−05

STYLE 1

Preferred devices are recommended choices for future use

and best overall value.

A = Assembly Location

1N540x = Device Number

x = 0, 1, 2, 4, 6, 7 or 8

YY = Year

WW = Work Week

G = Pb−Free Package

MARKING DIAGRAM

540x

YYWWG

See detailed ordering and shipping information on page 5 of

this data sheet.

ORDERING INFORMATION

http://onsemi.com

(Note: Microdot may be in either location)

Summary of content (6 pages)

PAGE 1
N5400 thru 1N5408 1N5404 and 1N5406 are Preferred Devices Axial-Lead Standard Recovery Rectifiers Lead mounted standard recovery rectifiers are designed for use in power supplies and other applications having need of a device with the following features: http://onsemi.
PAGE 2
1N5400 thru 1N5408 MAXIMUM RATINGS Symbol 1N5400 1N5401 1N5402 1N5404 1N5406 1N5407 1N5408 Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Rating VRRM VRWM VR 50 100 200 400 600 800 1000 V Non−repetitive Peak Reverse Voltage VRSM 100 200 300 525 800 1000 1200 V Average Rectified Forward Current (Single Phase Resistive Load, 1/2 in. Leads, TL = 105°C) IO 3.
PAGE 3
1N5400 thru 1N5408 NOTE 1 — AMBIENT MOUNTING DATA Data shown for thermal resistance junction−to−ambient (RqJA) for the mountings shown is to be used as typical guideline values for preliminary engineering or in case the tie point temperature cannot be measured. TYPICAL VALUES FOR RqJA IN STILL AIR Mounting Method 1 2 Lead Length, L (IN) 1/4 1/2 3/4 1/8 55 50 51 53 63 58 59 61 °C/W °C/W 3 28 °C/W MOUNTING METHOD 1 P.C. Board Where Available Copper Surface area is small L RqJA MOUNTING METHOD 3 P.C.
PAGE 4
1N5400 thru 1N5408 200 IFSM, PEAK HALF WAVE CURRENT (A) 400 TJ = 25°C 100 TYPICAL 50 30 20 200 1 CYCLE 100 90 80 70 60 50 40 1.0 2.0 3.0 5.0 7.0 10 20 50 70 100 30 10 NUMBER OF CYCLES 7.0 Figure 2. Maximum Nonrepetitive Surge Current IF(AV), AVERAGE FORWARD CURRENT (A) 5.0 3.0 2.0 1.0 0.7 0.5 0.3 0.2 0.4 0.8 1.6 1.2 2.0 2.4 2.8 3.2 4 DC 3 DC 2 Square Wave 50 3 Square Wave 1/4” 2 L = 1/32” 1/2” 1 0 40 50 60 70 80 90 100 110 120 130 140 150 160 Figure 3.
PAGE 5
1N5400 thru 1N5408 ORDERING INFORMATION Package Shipping† 1N5400G Axial Lead* 500 Units/Box 1N5400RLG Axial Lead* 1200/Tape & Reel 1N5401G Axial Lead* 500 Units/Box 1N5401RLG Axial Lead* 1200/Tape & Reel 1N5402G Axial Lead* 500 Units/Box 1N5402RLG Axial Lead* 1200/Tape & Reel 1N5404G Axial Lead* 500 Units/Box 1N5404RLG Axial Lead* 1200/Tape & Reel 1N5406G Axial Lead* 500 Units/Box 1N5406RLG Axial Lead* 1200/Tape & Reel 1N5407G Axial Lead* 500 Units/Box 1N5407RLG Axial Lea
PAGE 6
1N5400 thru 1N5408 PACKAGE DIMENSIONS AXIAL LEAD CASE 267−05 ISSUE G K D A 1 2 B K NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. DIM A B D K INCHES MIN MAX 0.287 0.374 0.189 0.209 0.047 0.051 1.000 --- MILLIMETERS MIN MAX 7.30 9.50 4.80 5.30 1.20 1.30 25.40 --- STYLE 1: PIN 1. CATHODE (POLARITY BAND) 2. ANODE ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC).