Data Sheet

ManualsBrandsON SEMICONDUCTOR ManualsDiodesStandard diode DO 204AH 100 V

1N/FDLL 914/A/B / 916/A/B / 4148 / 4448 — Small Signal Diode

1N/FDLL 914/A/B / 916/A/B / 4148 / 4448 Rev. 2.8

June 2015

1N/FDLL 914/A/B / 916/A/B / 4148 / 4448

Small Signal Diode

Ordering Information

Part Number Marking Package Packing Method

1N914 914 DO-204AH (DO-35) Bulk

1N914_T50A 914 DO-204AH (DO-35) Ammo

1N914TR 914 DO-204AH (DO-35) Tape and Reel

1N914ATR 914A DO-204AH (DO-35) Tape and Reel

1N914B 914B DO-204AH (DO-35) Bulk

1N914BTR 914B DO-204AH (DO-35) Tape and Reel

1N916 916 DO-204AH (DO-35) Bulk

1N916A 916A DO-204AH (DO-35) Bulk

1N916B 916B DO-204AH (DO-35) Bulk

1N4148 4148 DO-204AH (DO-35) Bulk

1N4148TA 4148 DO-204AH (DO-35) Ammo

1N4148_T26A 4148 DO-204AH (DO-35) Ammo

1N4148_T50A 4148 DO-204AH (DO-35) Ammo

1N4148TR 4148 DO-204AH (DO-35) Tape and Reel

1N4148_T50R 4148 DO-204AH (DO-35) Tape and Reel

1N4448 4448 DO-204AH (DO-35) Bulk

1N4448TR 4448 DO-204AH (DO-35) Tape and Reel

FDLL914 Black SOD-80 Tape and Reel

FDLL914A Black SOD-80 Tape and Reel

FDLL914B Black SOD-80 Tape and Reel

FDLL4148 Black SOD-80 Tape and Reel

FDLL4148_D87Z Black SOD-80 Tape and Reel

FDLL4448 Black SOD-80 Tape and Reel

FDLL4448_D87Z Black SOD-80 Tape and Reel

LL-34

THE PLACEMENT OF THE EXPANSION GAP

HAS NO RELATIONSHIP TO THE LOCATION

OF THE CATHODE TERMINAL

SOD-80 COLOR BAND MARKING

DEVICE

1ST BAND

DO-35

FDLL914 BLACK

FDLL914A BLACK

FDLL914B BLACK

Cathode is denoted with a black band

FDLL4148 BLACK

FDLL4448 BLACK

-1st band denotes cathode terminal

and has wider width

SOD80

Cathode Band

Summary of content (7 pages)

PAGE 1
N/FDLL 914/A/B / 916/A/B / 4148 / 4448 Small Signal Diode Cathode Band SOD-80 COLOR BAND MARKING DEVICE FDLL914 FDLL914A FDLL914B FDLL4148 FDLL4448 SOD80 LL-34 DO-35 Cathode is denoted with a black band THE PLACEMENT OF THE EXPANSION GAP HAS NO RELATIONSHIP TO THE LOCATION OF THE CATHODE TERMINAL 1ST BAND BLACK BLACK BLACK BLACK BLACK -1st band denotes cathode terminal and has wider width Ordering Information Part Number Marking Package Packing Method 1N914 914 DO-204AH (DO-35) Bulk 1N914_T5
PAGE 2
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Values are at TA = 25°C unless otherwise noted.
PAGE 3
120 160 o Ta= 25 C o 80 [nA] Reverse Current, I Reverse Voltage, V 100 R 150 R [V] Ta=25 C 140 130 120 60 40 20 110 1 2 3 5 10 20 30 50 0 100 10 Reverse Current, IR [uA] 20 Figure 1. Reverse Voltage vs. Reverse Current BV - 1.0 to 100 μA 100 o Ta= 25 C 700 F [mV] 500 650 R [mV] 70 750 o Ta= 25 C Forward Voltage, V 450 Forward Voltage, V 50 Figure 2. Reverse Current vs.
PAGE 4
.0 0.90 [ns] o o Ta = 25 C 3.5 Reverse Recovery Time, t Total Capacitance (pF) rr TA = 25 C 0.85 0.80 2 4 6 8 10 12 2.5 2.0 1.5 1.0 10 0.75 0 3.0 14 20 30 40 50 60 Reverse Recovery Current, Irr [mA] REVERSE VOLTAGE (V) IF = 10mA , IRR = 1.0 mA , Rloop = 100 Ohms Figure 8. Reverse Recovery Time vs. Reverse Recovery Current Figure 7.
PAGE 5
1N/FDLL 914/A/B / 916/A/B / 4148 / 4448 — Small Signal Diode Physical Dimensions Figure 11. AXIAL LEADED, GLASS, JEDEC DO204, VARIATION AH, DO-204AH (DO-35) © 2002 Fairchild Semiconductor Corporation 1N/FDLL 914/A/B / 916/A/B / 4148 / 4448 Rev. 2.8 www.fairchildsemi.
PAGE 6
1N/FDLL 914/A/B / 916/A/B / 4148 / 4448 — Small Signal Diode Physical Dimensions (Continued) 5() & 5 /$1' 3$77(51 5(&200(1'$7,21 127(6 81/(66 27+(5:,6( 63(&,),(' $ 3$&.
PAGE 7
TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks.