Owner's Manual

GUIDE SPECIFICATIONS
On-Q
®
Residential Multimedia Panels
Project Name Project No. Date
Project Location 27 11 16-3 Communications Cabinets, Racks, Frames,
& Enclosures
4. Enclosure ships with cardboard insert to prevent debris or paint over-spray from
entering the MMP during rough-in stage of installation.
5. Provide mounting hooks on cover to align screw holes for ease of installation.
6. Multiple knockouts on enclosure support conduit up to two (2) inches in diameter
and facilitate cable routing and entry.
7. Holds 1/4, 1/2 and full-width expansion modules with ability to mount most
modules either vertically or horizontally.
8. Provide for bonding and grounding to meet TIA/EIA 606 Standards.
9. Conformance with Standards: Comply with TIA/EIA 568-A and TIA/EIA 570-A
requirements and meet FCC Part 68.
10. Enclosure to be UL listed in accordance with ANSI/UL 985, ANSI/UL 1023,
CAN/CSA-C22.2 No. 182.4-1990, ULC-S545, and CSA-C22.2 No. 144.1 (2006).
Specifier Note: Enclosure size, data module, voice module, and video module selection will
depend on application variables, such as fiber or copper, Cat 5e, Cat 6, or Cat 6a, size of
residence, etc. Retain as many of the following five (5) enclosures as required for a specific
project and delete the others.
Specifier Note: The enclosures in the five (5) paragraphs can accommodate a variety of
modules. Select desired modules from Article 2.3 below.
Specifier Note: The 14"-42" metal enclosures the five (5) paragraphs below are also available
with screw on doors (ENXX00), enclosure only (ENXX80), hinged cover only (ENXX60),
screw on cover only (ENXX20), and an enclosure with knockouts (ENXX85). Revise the cata-
log number and description accordingly to reflect the type of enclosure desired.
C. Metal Enclosures:
1. 42" Enclosure: Catalog No. EN4250 enclosure with hinged cover and lock;
minimum dimensions shall be 42" H x 14.25" W x 3.6" D.
2. 28" Enclosure: Catalog No. EN2850 enclosure with hinged cover and lock;
minimum dimensions shall be 28" H x 14.25" W x 3.6" D.
3. 20" Enclosure: Catalog No. EN2050 enclosure with hinged cover and lock;
minimum dimensions shall be 20" H x 14.25" W x 3.6" D.
4. 14" Enclosure: Catalog No. EN1450 enclosure with hinged cover and lock;
minimum dimensions shall be 14" H x 14.25" W x 3.6" D.
D. Plastic Enclosures for General Structured Wiring, General: Fabricated from UL-rated
ABS plastic, paintable white color and provided with matching hinged flanged cover.
Enclosure accommodates both wired structured wiring systems and wireless
networking equipment. Complies with UL60950-1 and CAN/CSA C22.2 No. 60950-01-
07. RoHS Compliant.
1. Plastic enclosure allows wireless devices such as access points to secure in
cabinet without degrading network performance.
2. Enclosure can be surface or flush mounted. Staggered tabs allow side-by-side
installation of multiple enclosures.
3. Meets or exceeds requirements of UL Standard 2416. For use in non-fire-rated
walls.
4. Universal mounting grid compatible with distribution modules from multiple
manufacturers.