Easy, Reliable & Secure Powerline 500 Home Network Adapter (PL500) Installation Guide
LED Descriptions Item Description Power LED • Solid green. The electrical power is on. • Solid amber. The adapter is in power saving mode. • Blinking green. The adapter is in the process of setting up security. • Off. There is no electrical power. Performance LED • Solid green. The adapter is connected to a Powerline network. • Off. The adapter has not found any other compatible Powerline devices using the same encryption key. Ethernet LED • Solid green. The Ethernet port is linked. • Off.
Button Descriptions Security button Ethernet port Factory Reset button Item Description Factory Press the Factory Reset button for 1 Reset button second, then release it to return the Powerline adapter to its factory default settings. Security button After you plug in your new Powerline Network AV adapter, press the Security button for 2 seconds. Then press the Security button on one of the other adapters in your existing network for 2 seconds. Both buttons must be pressed within 2 minutes.
Install Your Powerline Adapter The following procedure describes how to add a Powerline adapter to your existing Powerline network. Repeat this procedure for each Powerline adapter that you want to add. To add a Powerline adapter to your existing Powerline network: 1 Plug your Powerline adapter into a power outlet. Set up security on your Powerline adapter to add it to your existing Powerline network. a Press the Security button for 2 seconds.
temporarily disable Powerline communication. If Powerline communication is disabled, use the Factory Reset button to return the Powerline adapter to its factory default settings. 3 Connect devices to your Powerline adapter. You can connect a device, such as a router or a computer, to the Ethernet port on the bottom of the Powerline adapter. Safety Information • AC input: 100–240V, 0.2A (Max). • Operating temperature: 0–40°C.
Support Thank you for selecting On Networks products. After installing your device, locate the serial number on the label of your product and use it to register your product at http://support.on-networks.com/register. You must register your product before you can use On Networks telephone support. For product updates and web support, visit http://support.on-networks.com. On Networks recommends that you use only the official On Networks support resources.
On Networks 6455 East Johns Crossing Suite 230 Duluth, GA 30097 USA March 2013
