Easy, Reliable & Secure Installation Guide Po w e rl i n e 200 H o me N etwor k Adap ter (P L 2 0 0 )
Trademarks Brand and product names are trademarks or registered trademarks of their respective holders. Information is subject to change without notice. Statement of Conditions In the interest of improving internal design, operational function, and/or reliability, On Networks reserves the right to make changes to the products described in this document without notice.
LED descriptions Item Description Power LED • Solid green. The electrical power is on. • Solid amber. The adapter is in power saving mode. • Blinking green. The adapter is in the process of setting up security. • Off. There is no electrical power. • Solid green. The Ethernet port is linked. • Off. There is no Ethernet connection. • Solid green. The adapter is connected to a Powerline network. • Off. The adapter has not found any other compatible Powerline devices using the same encryption key.
Button descriptions Reset button Security button Ethernet port Item Description Factory Reset Press the Reset button for 1 second, then release it to return the Powerline adapter to its factory default settings. After you plug in your new AV adapter, press the Security button for 2 seconds, then press the security button on one of the other AV adapters in your existing network for 2 seconds. Both buttons must be pressed within 2 minutes.
Install your Powerline adapter For each Powerline adapter you are adding to your existing Powerline network, do the following: 1. Plug each Powerline adapter into a power outlet. 2. Set up security on your Powerline adapter to add it to your existing Powerline network. Press the Security button for 2 seconds, then press the Security button on one of the other Powerline adapters in your existing network for 2 seconds. Both buttons must be pressed within two minutes.
3. Connect devices to your Powerline adapter. To the Ethernet port on the bottom of the Powerline adapter, you can connect a device, such as a router or a computer. Safety Information • • • AC input: 100-240V~, 60m A (Max). Operating temperature: 0C~40C. The socket-outlet shall be installed near the equipment and shall be easily accessible.
Technical Support Thank you for selecting On Networks products. After installing your device, locate the serial number on the label of your product, and use it to register your product at http://www.on-networks.com/register. Registration is required before you can use the telephone support service. Registration through http://www.on-networks.com/register is strongly recommended. Go to http://www.on-networks.com/support/ products/pl200 for product updates and web support.
April 2012
