Easy, Reliable & Secure N150 Wireless ADSL2+ Modem Router N150RM User M anua l 350 East Plumeria Drive San Jose, CA 95134 USA December 2012 202-11139-01 v1.
N150 WiFi Router (N150R) Trademarks Brand and product names are trademarks or registered trademarks of their respective holders. Information is subject to change without notice. In the interest of improving internal design, operational function, and/or reliability, On Networks reserves the right to make changes to the products described in this document without notice.
Contents Chapter 1 Hardware Setup Unpack Your Modem Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Position Your Modem Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Hardware Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . .
N150 WiFi Router (N150R) Default DMZ Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 MTU Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 LAN Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Use the Modem Router as a DHCP Server . . . . . . . . . . . . . . . . . . . . . . 33 Address Reservation . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
N150 WiFi Router (N150R) Power LED Is Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 Power LED Is Red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 LAN LED Is Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 Cannot Log In to the Modem Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 Troubleshoot the Internet Connection . . . . . . . . . . . . . . . . . . . . .
1. Hardware Setup G et t i n g to k now you r m o dem router 1 This chapter explains how to set up your hardware. If you have already set up your modem router, you can skip this chapter. Chapter 2 explains how to set up your Internet connection.
N150 Wireless ADSL2+ Modem Router N150RM Unpack Your Modem Router Open the box and remove the modem router, cables, and installation guide. The filter or splitter provided depends on the region. Filter/splitter Power adapter N150 Modem Router Ethernet cable Phone cable Figure 1. Check the package contents If any parts are incorrect, missing, or damaged, contact your On Networks dealer. Keep the carton and original packing materials, in case you need to return the product for repair.
N150 Wireless ADSL2+ Modem Router N150RM Hardware Features Before you cable your modem router, take a moment to become familiar with the front, side, and back panels and the label. Pay particular attention to the LEDs on the front panel. Front Panel The modem router front panel has buttons and status LEDs. WPS Wireless Internet ADSL Ethernet Power Figure 2. Modem router front panel Table 1.
N150 Wireless ADSL2+ Modem Router N150RM Table 1. Front panel LED descriptions (continued) LED ADSL Description • • • Ethernet (1-4) Power/ Check Solid green. You have a DSL connection. In technical terms, the DSL port is synchronized with an ISP’s network-access device. Blinking green. The modem router is negotiating the best possible speed on the DSL line. Off. The unit is off or there is no DSL link established. • Solid green.
N150 Wireless ADSL2+ Modem Router N150RM Reset Button on the Side Panel You can use the Reset button to return the modem router to its factory settings. Reset button Figure 4. Reset button To reset the modem router: Use a pin or paper clip to press and hold the Reset button for at least 7 seconds. For information about the factory settings, see Factory Settings on page 72.
N150 Wireless ADSL2+ Modem Router N150RM Install the Modem Router A microfilter filters DSL interference out of standard phone equipment that shares the line with DSL service. Examples of devices are telephones, fax machines, answering machines, and caller ID displays. To install the modem router: 1. Connect the ADSL. a. Install an ADSL filter/splitter between the phone line and the phone. b. Connect the ADSL port of the modem router to the ADSL port of the filter/splitter. c.
N150 Wireless ADSL2+ Modem Router N150RM You can use an Ethernet cable or connect wirelessly. • Use the yellow Ethernet cable to connect your computer to an Ethernet port on your modem router. • Or connect wirelessly by using the preset wireless security settings on the label on the bottom of the router. 4. Open a browser. The first time that you connect to your modem router, the browser automatically displays a modem router screen to help you set up your Internet connection.
N150 Wireless ADSL2+ Modem Router N150RM Tips for Connecting to the Modem Router If the browser cannot display the web page: • Make sure that the computer is connected to one of the four LAN Ethernet ports or wirelessly to the modem router. • Make sure that the modem router has full power, and that its Wireless LED is lit. • Close and reopen the browser to make sure that the browser does not cache the previous page. • Browse to http://www.mywifirouter.com (or http://192.168.0.1/index.htm).
2.
N150 Wireless ADSL2+ Modem Router N150RM Modem Router Setup Preparation You can set up your modem router with the Setup Wizard as described in EZ Setup Wizard on page 18, or manually as described in Internet Setup (Basic Settings) on page 22. However, before you start the setup process, you need to have your ISP information and to make sure the laptops, computers, and other devices in the network have the settings described here. Note: For a Macintosh or Linux system, you have to use manual setup.
N150 Wireless ADSL2+ Modem Router N150RM Types of Logins and Access There are separate types of logins that have different purposes. It is important that you understand the difference so that you know which login to use when. • Modem router login logs you in to the modem router interface. • ISP login logs you in to your Internet service. Your service provider has provided you with this login information in a letter or some other way.
N150 Wireless ADSL2+ Modem Router N150RM Unsuccessful Login If you do not see the login prompt, do the following: 1. Check the LEDs on the front of modem router to make sure that it is plugged in, its power is on. If you used an Ethernet cable between your computer and the modem router, make sure that it is connected to a LAN port. 2.
N150 Wireless ADSL2+ Modem Router N150RM • Router Status. View the status of the modem router and its Internet connection. • EZ Setup Wizard. Specify the language and location, and automatically detect the Internet connection. See EZ Setup Wizard on page 18. • WPS Setup. Join the secure WiFi network without typing the password. See Join Your Wireless Network on page 19. • Setup tab. Set, upgrade, and check the ISP and wireless network settings of your modem router.
N150 Wireless ADSL2+ Modem Router N150RM To troubleshoot an unsuccessful Internet connection: 1. Review your settings to be sure that you have selected the correct options and typed everything correctly. 2. Contact your ISP to verify that you have the correct configuration information. 3. Read Chapter 7, Troubleshooting. If problems persist, register your product and contact technical support. 4. If you cannot connect to the modem router, check the Internet Protocol (TCP/IP) properties.
N150 Wireless ADSL2+ Modem Router N150RM When the modem router establishes a WPS connection, the modem router WPS screen displays a confirmation message. Manual Method With the manual method, select the network that you want, and type its password to connect. To connect manually: 1. On your computer or wireless device, open the software that manages your wireless connections. This software scans for all wireless networks in your area. 2. Look for your network and select it.
3.
N150 Wireless ADSL2+ Modem Router N150RM Internet Setup (Basic Settings) The Basic Settings screen displays when you select No. I want to configure the Router myself in the Setup Wizard and is also available from the modem router menu. It is where you view or change ISP information. The fields that display vary depending on whether your Internet connection requires a login. To manually set up the Internet connection: 1. Select Setup > Internet Setup. 2.
N150 Wireless ADSL2+ Modem Router N150RM Does Your Internet Connection Require a Login? Answer either yes or no. • When no login is required, these fields display: Account Name (If Required). Enter the account name that your ISP provided. This might also be called the host name. Domain Name (If Required). Enter the domain name that your ISP provided. • When your ISP requires a login, these fields display: Encapsulation. Encapsulation is a method for enclosing multiple protocols.
N150 Wireless ADSL2+ Modem Router N150RM Preset Security The modem router comes with preset security. This means that the Wi-Fi network name (SSID) and the WiFi network password (network key) are preset in the factory. You can find the preset SSID and passphrase on the bottom of the unit. • Wi-Fi network name (SSID) identifies your network so devices can find it. • Passphrase controls access to your network. Devices that know the SSID and the passphrase can find your wireless network and connect.
N150 Wireless ADSL2+ Modem Router N150RM Restrict Access by MAC Address You can enhance your network security by allowing access to only specific computers based on their Media Access Control (MAC) addresses. You can restrict access to only trusted computers so that unknown computers cannot wirelessly connect to the modem router. The wireless station MAC address filtering adds more security protection to the wireless security option that you have in force.
N150 Wireless ADSL2+ Modem Router N150RM • The security option on each wireless device in the network must match the settings of the modem router. For example, if you select a security option that requires a passphrase, be sure to use same passphrase for each wireless computer in the network. View or Change Wireless Settings Your preset modem router comes set up with a unique WiFi network name (SSID) and network password. This information is printed on the label of your modem router.
N150 Wireless ADSL2+ Modem Router N150RM Wireless Settings Screen Fields Wireless Network • Name (SSID). The SSID is also known as the wireless network name. Enter a 32-character (maximum) name in this field. This field is case-sensitive. The default SSID is randomly generated, and there is typically no need to change it. • Region. The location where the modem router is used. It might not be legal to operate the modem router in a region other than the regions listed. • Channel.
N150 Wireless ADSL2+ Modem Router N150RM 3. Click Apply. Restrict Wireless Access by MAC Address You can set up a list of computers and wireless devices that are allowed to join the wireless network. This list is based on the unique MAC address of each computer and device. Each wireless card or network device has a MAC address, which is a unique 12-character physical address, containing the hexadecimal characters 0–9, a–f, or A–F only, and separated by colons (for example, 00:09:AB:CD:EF:01).
N150 Wireless ADSL2+ Modem Router N150RM 6. Select the Turn Access Control On check box. 7. Click Apply. WAN Setup The WAN Setup screen lets you configure a DMZ (demilitarized zone) server, change the maximum transmit unit (MTU) size, and enable the modem router to respond to a ping on the WAN (Internet) port. Select Setup > WAN Setup. The following information is displayed: • Connect Automatically, as Required. The modem router connects to the Internet automatically. • Enable PPPoE Relay.
N150 Wireless ADSL2+ Modem Router N150RM • Disable SIP ALG. The Session Initiation Protocol (SIP) Application Level Gateway (ALG) is enabled by default to optimize VoIP phone calls that use the SIP. You can select this check box to disable the SIP ALG, which might be useful when running certain applications. Default DMZ Server The default DMZ server feature is helpful when you are using some online games and videoconferencing applications that are incompatible with Network Address Translation (NAT).
N150 Wireless ADSL2+ Modem Router N150RM • You have problems connecting to your ISP or other Internet service, and the technical support of either the ISP or On Networks recommends changing the MTU setting. These web-based applications might require an MTU change: - A secure website that does not open, or displays only part of a web page - Yahoo email - MSN portal - America Online’s DSL service • You use VPN and have severe performance problems.
N150 Wireless ADSL2+ Modem Router N150RM 3. Click Apply to save the settings. LAN Ports The LAN Ports screen allows configuration of LAN IP services such as Dynamic Host Configuration Protocol (DHCP) and Routing Information Protocol (RIP). The modem router is shipped preconfigured to use private IP addresses on the LAN side and to act as a DHCP server. The modem router’s default LAN IP configuration is: • LAN IP address. 192.168.0.1 • Subnet mask. 255.255.255.
N150 Wireless ADSL2+ Modem Router N150RM LAN TCP/IP Setup • IP Address. The LAN IP address of the modem router. • IP Subnet Mask. The LAN subnet mask of the modem router. Combined with the IP address, the IP subnet mask allows a device to know which other addresses are local to it, and which have to be reached through a gateway or modem router. • RIP Direction. Router Information Protocol (RIP) allows a router to exchange routing information with other routers.
N150 Wireless ADSL2+ Modem Router N150RM You can specify the pool of IP addresses that the modem router assigns by setting the starting IP address and ending IP address. These addresses should be part of the same IP address subnet as the modem router’s LAN IP address. Using the default addressing scheme, define a range between 192.168.0.2 and 192.168.0.254, although you might want to save part of the range for devices with fixed addresses.
4.
N150 Wireless ADSL2+ Modem Router N150RM Block Internet Sites Use keyword blocking to prevent certain types of HTTP traffic from accessing your network. The blocking can be always or according to a scheduled. To block traffic: 1. Select Security > Block Sites. 2. Select one of the keyword blocking options: • Per Schedule. Turn on keyword blocking according to the Schedule screen settings. • Always. Turn on keyword blocking all the time, independent of the Schedule screen. 3.
N150 Wireless ADSL2+ Modem Router N150RM Block Services Services are functions performed by server computers at the request of client computers. For example, web servers serve web pages, time servers serve time and date information, and game hosts serve data about other players’ moves. When a computer on the Internet sends a request for service to a server computer, the requested service is identified by a service or port number.
N150 Wireless ADSL2+ Modem Router N150RM Set Up Firewall Rules The Firewall Rules screen lets you add custom rules to make exceptions to the default rules. Exceptions can be based on the service or application, source or destination IP addresses, and time of day. You can log traffic that matches or does not match the rule and change the order of rule precedence.
N150 Wireless ADSL2+ Modem Router N150RM Set the Time Zone The modem router uses the Network Time Protocol (NTP) to obtain the current time and date from one of several network time servers on the Internet. To set the time zone: 1. Select Security > Schedule. 2. Select your time zone. This setting determines the blocking schedule and time-stamping of log entries. 3.
N150 Wireless ADSL2+ Modem Router N150RM Schedule Services If you enabled service blocking in the Block Services screen, you can set up a schedule for when blocking occurs or when access is not restricted. To schedule services: 1. Select Security > Schedule. 2. To block Internet services based on a schedule, select Every Day or select one or more days. 3. If you want to limit access completely for the selected days, select All Day.
N150 Wireless ADSL2+ Modem Router N150RM Set Up Email Alerts To receive logs and alerts by email, provide your email information in the E-mail screen and specify which alerts you want to receive and how often. Select Security > E-mail to display the following screen: Figure 7. E-Mail screen • Turn E-mail Notification On. Select this check box if you want to receive email logs and alerts from the modem router. • Send to This E-mail Address. Enter the email address where you want logs and alerts sent.
N150 Wireless ADSL2+ Modem Router N150RM - Time. This setting specifies the time of day to send the log. This is relevant when the log is sent daily or weekly. If the Weekly, Daily, or Hourly option is selected and the log fills up before the specified period, the log is emailed to the specified email address. After the log is sent, it is cleared from the modem router’s memory. If the modem router cannot email the log file, the log buffer might fill up.
5.
N150 Wireless ADSL2+ Modem Router N150RM Upgrade the Firmware The modem router firmware (routing software) is stored in flash memory. By default, when you log in to your modem router, it checks the On Networks website for new firmware and alerts you if there is a newer version. WARNING: When uploading firmware to the modem router, do not interrupt the web browser by closing the window, clicking a link, or loading a new page. If the browser is interrupted, it could corrupt the firmware.
N150 Wireless ADSL2+ Modem Router N150RM Check for Firmware Upgrades You can use the Firmware Upgrade screen to manually check the On Networks website for newer versions of firmware for your product. To check for newer versions of firmware: WARNING: When uploading firmware to the modem router, do not interrupt the web browser by closing the window, clicking a link, or loading a new page. If the browser is interrupted, it could corrupt the firmware. 1.
N150 Wireless ADSL2+ Modem Router N150RM Backup Settings The modem router configuration settings are stored in a configuration file (*.cfg). This file can be backed up to your computer, restored, or used to revert to factory default settings. Back Up To back up the configuration file: 1. Select Management > Backup Settings to display the following screen: 2. Click Save to save a copy of the current settings. 3. Choose a location to store the .cfg file that is on a computer on your network.
N150 Wireless ADSL2+ Modem Router N150RM Set the Password For security reasons, the modem router has its own user name of admin. The password defaults to admin. You can and should change the password to one that is secure but also easy to remember. The ideal password contains no dictionary words from any language and is a mixture of uppercase and lowercase letters, numbers, and symbols. It can be up to 30 characters.
N150 Wireless ADSL2+ Modem Router N150RM View Router Status The Router Status screen provides status and usage information. To view the Router Status screen: Select Management > Router Status. ADSL Port Settings MAC Address. The Ethernet MAC address of the DSL port. IP Address. The DSL port IP address. If no address is shown, the modem router cannot connect to the Internet. Network Type. The value (such as PPPoA) depends on your ISP. IP Subnet Mask. The DSL port IP subnet mask. Gateway IP Address.
N150 Wireless ADSL2+ Modem Router N150RM DHCP server. If Off, the modem router does not assign IP addresses to PCs on the LAN. If On, the modem router does assign IP addresses to computers on the LAN. IP Subnet Mask. The subnet mask associated with the LAN IP address. Modem Settings ADSL Firmware Version. The model of the hardware and the currently running firmware version. Modem Status. The status of the modem connection on the DSL line. Downstream Connection Speed.
N150 Wireless ADSL2+ Modem Router N150RM Show Statistics Click the Show Statistics button on the Router Status screen to display a screen similar to the following: Port The statistics for the WAN (Internet), LAN (local), and wireless LAN (WLAN) ports. For each port, the screen displays the following: • Status. The link status of the port. • TxPkts. The number of packets transmitted since reset or manual clear. • RxPkts. The number of packets received since reset or manual clear. • Collisions.
N150 Wireless ADSL2+ Modem Router N150RM Connection Status In the Router Status screen, click the Connection Status button. • Connection Time. The time elapsed since the last connection to the Internet through the DSL port. • Connecting to server. The connection status. • Negotiation. On or Off. • Authentication. On or Off. • Getting IP Address. The IP address assigned to the WAN port by the ISP. • Betting Network Mask. The subnet mask assigned to the WAN port by the ISP.
N150 Wireless ADSL2+ Modem Router N150RM Logs The modem router logs security-related events such as denied incoming service requests, hacker probes, and administrator logins. If you enable content filtering in the Block Sites screen, the Logs screen shows you when someone on your network tries to access a blocked site. If you enable email notification, you receive these logs in an email message. To view the log: Select Management > Logs.
N150 Wireless ADSL2+ Modem Router N150RM Diagnostics During normal operation, you do not need to use diagnostics. To use diagnostics: Select Management > Diagnostics. The following features are available on the Diagnostics screen. • Ping an IP address. Use this to send a ping packet request to the specified IP address. Ping can be used to test a connection. If the request times out (no reply is received), this usually means that the destination is unreachable.
6. Advanced Settings 6 This chapter describes the advanced features of your modem router. The information is for readers with advanced networking knowledge who want to set the modem router up for unique situations such as when remote access from the Internet by IP or domain name is needed. Note: For information about port forwarding and port triggering, see Chapter 4, Security Settings.
N150 Wireless ADSL2+ Modem Router N150RM Advanced Wireless Settings To view the Advanced Wireless Settings screen: Select Advanced > Wireless Settings to display the following screen: The following settings are available in this screen: Enable Wireless Router Radio. You can completely turn off the wireless portion of the wireless modem router by clearing this check box. Select this check box again to enable the wireless portion of the modem router.
N150 Wireless ADSL2+ Modem Router N150RM WPS Settings. Router’s PIN. The number that you can use from a wireless computer or device to join the wireless network through WPS. If the modem router detects attempts to use the PIN to break into the network, the PIN is disabled. To enable the PIN, clear the Disable Router PIN check box and click Apply. Keep Existing Wireless Settings.
N150 Wireless ADSL2+ Modem Router N150RM 3. Select the Use a Dynamic DNS Service check box. 4. Enter the web address of your Dynamic DNS service provider. For example, for DynDNS.org, type www.dyndns.org. 5. Type the host name (or domain name) that your Dynamic DNS service provider gave you. 6. Type the user name for your Dynamic DNS account. This is the name that you use to log in to your account, not your host name. 7. Type the password (or key) for your Dynamic DNS account. 8.
N150 Wireless ADSL2+ Modem Router N150RM To set up a static route: 1. Select Advanced > Static Routes, and click Add to display the following screen: 2. In the Route Name field, type a name for this static route (for identification purposes only.) 3. Select the Private check box if you want to limit access to the LAN only. If Private is selected, the static route is not reported in RIP. 4. Select the Active check box to make this route effective. 5. Type the IP address of the final destination. 6.
N150 Wireless ADSL2+ Modem Router N150RM Remote Management The remote management feature lets you upgrade or check the status of your N150RM modem router over the Internet. To set up remote management: 1. Select Advanced > Remote Management. Note: Be sure to change the modem router’s default login password to a secure password. The ideal password contains no dictionary words from any language and contains uppercase and lowercase letters, numbers, and symbols. It can be up to 30 characters. 2.
N150 Wireless ADSL2+ Modem Router N150RM Normal web browser access uses the standard HTTP service port 80. For greater security, enter a custom port number for the remote web management interface. Choose a number from 1024 to 65535, but do not use the number of any common service port. The default is 8080, which is a common alternate for HTTP. 5. Click Apply to have your changes take effect. 6.
N150 Wireless ADSL2+ Modem Router N150RM advertisement time to live is 4 hops, which is fine for most home networks. If you notice that some devices are not being updated or reached correctly, it might be necessary to increase this value. UPnP Portmap Table. The UPnP Portmap Table displays the IP address of each UPnP device that is accessing the modem router and which ports (internal and external) that device has opened.
7. Troubleshooting Diagnose and solve problem s 7 This chapter provides information about troubleshooting your modem router. After each problem description, instructions are provided to help you diagnose and solve the problem.
N150 Wireless ADSL2+ Modem Router N150RM Troubleshoot with the LEDs When you turn the power on, the Power, Ethernet, and ADSL LEDs should light as described here. If they do not, refer to the sections that follow for help. 1. When power is first applied, the Power LED lights. 2. After approximately 10 seconds, the Ethernet and ADSL LEDs light as follows: a. The Ethernet port LEDs light for any local ports that are connected. b. The ADSL LED lights to indicate that there is a link to the connected device.
N150 Wireless ADSL2+ Modem Router N150RM Power LED Is Red When the modem router is turned on, it performs a power-on self-test during which time the Power LED turns red. If the Power LED does not turn green within a minute or so or if it turns red at any other time during normal operation, there is a fault within the modem router. If the Power LED turns red to indicate a modem router fault, turn the power off and on to see if the modem router recovers.
N150 Wireless ADSL2+ Modem Router N150RM • Make sure that your browser has Java, JavaScript, or ActiveX enabled. If you are using Internet Explorer, click Refresh to be sure that the Java applet is loaded. • Try quitting the browser and launching it again. • Make sure you are using the correct login information. The factory default login name is admin, and the password is password. Make sure that Caps Lock is off when you enter this information.
N150 Wireless ADSL2+ Modem Router N150RM • Verify that you are connected to the correct telephone line. If you have more than one phone line, be sure that you are connected to the line with the ADSL service. It might be necessary to use a swapper if your ADSL signal is on pins 1 and 4 or the RJ-11 jack. The modem router uses pins 2 and 3. Internet LED Is Red If the Internet LED is red, the device was unable to connect to the Internet.
N150 Wireless ADSL2+ Modem Router N150RM PPPoE or PPPoA To debug the PPPoE or PPPoA connection: 1. Log in to the modem router. 2. On the Home screen (Router Status), click the Connection Status button. 3. If all of the steps indicate OK, then your PPPoE or PPPoA connection is up and working. 4. If any of the steps indicates Failed, you can attempt to reconnect by clicking Connect. The modem router continues to attempt to connect indefinitely.
N150 Wireless ADSL2+ Modem Router N150RM TCP/IP Network Does Not Respond Most TCP/IP terminal devices and routers have a ping utility for sending an echo request packet to the designated device. The device responds with an echo reply to tell whether a TCP/IP network is responding to requests. Test the LAN Path to Your Modem Router You can ping the modem router from your computer to verify that the LAN path to your modem router is set up correctly.
N150 Wireless ADSL2+ Modem Router N150RM Test the Path from Your Computer to a Remote Device After you verify that the LAN path works correctly, test the path from your Windows PC to a remote device. In the Windows Run screen, type: ping -n 10 IP address where IP address is the IP address of a remote device such as your ISP’s DNS server. If the path is functioning correctly, replies as described in Test the LAN Path to Your Modem Router on page 68 display.
N150 Wireless ADSL2+ Modem Router N150RM just finished setting up the modem router, wait at least 5 minutes, and check the date and time again. • Time is off by one hour. This modem has automatic DST adjustment. To use this feature, in the Schedule screen, select the Automatically adjust for daylight savings time check box and click Apply.
A.
N150 Wireless ADSL2+ Modem Router N150RM Factory Settings You can return the modem router to its factory settings. Use the end of a paper clip or some other similar object to press and hold the Reset button for at least 7 seconds. Reset button Figure 1. Reset button The modem router resets, and returns to the factory settings, as shown in the following table. Table 1. Factory default settings Feature Router Login Internet connection Local network (LAN) Default Behavior User login URL http://www.
N150 Wireless ADSL2+ Modem Router N150RM Table 1. Factory default settings (continued) Feature Default Behavior Local network DHCP starting IP address (LAN) continued DHCP ending IP address 192.168.0.2 Firewall Wireless 192.168.0.
N150 Wireless ADSL2+ Modem Router N150RM Technical Specifications Table 2. Technical specifications Feature Description Data and Routing Protocols TCP/IP, RIP-1, RIP-2, DHCP, PPPoE or PPPoA, RFC 1483 Bridged or Routed Ethernet, and RFC 1577 Classical IP over ATM AC plug is localized 110V-220V, 50/60 Hz, input Dimensions 200 x 113.4 x 86.2 mm (7.9 x 4.5 x 3.4 in.) Weight 0.28 kg (0.
B. Notification of Compliance Wi reles s routers, gateways, A Ps B Regulatory Compliance Information Note: This section includes user requirements for operating this product in accordance with National laws for usage of radio spectrum and operation of radio devices. Failure of the end-user to comply with the applicable requirements may result in unlawful operation and adverse action against the end-user by the applicable National regulatory authority.
N150 Wireless ADSL2+ Modem Router N150RM Español [Spanish] Por medio de la presente On Networks Inc. declara que el Radiolan cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. Ελληνική [Greek] ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ On Networks Inc. ∆ΗΛΩΝΕΙ ΟΤΙ Radiolan ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩ∆ΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ∆ΙΑΤΑΞΕΙΣ ΤΗΣ Ο∆ΗΓΙΑΣ 1999/5/ΕΚ. Français [French] Par la présente On Networks Inc.
N150 Wireless ADSL2+ Modem Router N150RM Íslenska [Icelandic] Hér með lýsir On Networks Inc. yfir því að Radiolan er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 1999/5/EC. Norsk [Norwegian] On Networks Inc. erklærer herved at utstyret Radiolan er i samsvar med de grunnleggende krav og øvrige relevante krav i direktiv 1999/5/EF. This device is a 2.
N150 Wireless ADSL2+ Modem Router N150RM • For product available in the USA market, only channel 1~11 can be operated. Selection of other channels is not possible. • This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.
