Instruction Manual

9
Clean Sensing System
On-screen Indication and Data Logging
of Particle Amount
Quality Control with Multi-point Measurement
Realtime Clean Air Monitor
For In-line Applications
Electrostatic
Sensor
No. of connectable Sensors: 10 max.
Note: Use Calculating Unit ZX-CAL2 when
connecting multiple amplifier units.
Multi-point data output
A variety of displays (including color graphs for visual
confirmation by color of particle densities, indication
of the number of particles, and trend graphs) can be
set. Particle Sensors and Interface Units can also be
set from the personal computer. Measurement data is
logged in realtime and can be manipulated in
CSV-format files using spreadsheet software.
Installation is simple with DIN Track mounting.
The In-line Air Particle Sensor was developed for in-line
applications, with a 24-VDC power supply.
External outputs can be at two levels: warnings and alarms.
Suitable for in-line trend management applications.
Up to ten Particle Sensors and up to nine Air Clean Units can be controlled through one Interface Unit and Real
Time Clean Air Monitor. There are no time-consuming restrictions, such as the order that power is turned ON.
The level of cleanliness can be controlled for each process and constant monitoring is possible in relation to
quality data.
Air Clean Unit air volume settings,
operation, and errors can be
checked on the Amplifier or Interface
Unit.
Patent Pending
Measurement values can be easily logged on a
personal computer by using the Interface Unit and
special software (sold separately).
Data from sequential sensing of particles can be
used to improve quality.