Instruction Manual

11
Ordering Information
Accessories
Ionizers
Air Clean Units
Model Qty.
ZN9-JH04 4 per pack
Single-sided Connector Cables
(for DC power supply or I/O connection)
Cable length Model Qty.
2 m ZN9-JC02 1
Sensor Head
Appearance Measured particle diameter Model
0.3, 0.5, and 1.0 µm ZN-PD03
Amplifiers
Appearance Power supply Connection method Model
24 VDC Cable connection ZN-PDA11 2M
ZN-PDA12 2M
Calculating Unit
Appearance Model
ZX-CAL2
Clean Monitoring Systems
Appearance Contents Connection method Model
Double-sided Connector Cable
(for extension between Sensor Head and Amplifier)
Cable length Model Qty.
1 m ZX-XC1A 1
4 m ZX-XC4A 1
8 m ZX-XC8A 1
Model Qty.
ZN9-PF1 1
Cleaning Filter ZN9-PC1 1
Head Attachment Tool ZN9-PB1 1
* Type with filter clogging detection.
An Interface Unit is not available by itself.
Air Clean Units
Ionizers
Air Particle Sensors
Supplied from Air Clean
Unit.
Replacement Discharge
Needles
Connector connection
(Air Clean Unit feedback
connection)
Supplied from the
Air Clean Unit.
For RS-232C connection
with personal computer only
For RS-232C connection
with personal computer
or Air Clean Unit
feedback connection
ZN-SF11 Interface Unit
+ Realtime Clean Air
Monitor
ZN-SF12 Interface Unit
+ Realtime Clean Air
Monitor
Sensor Head Replacement
Filter Set
ZN-SFW12
ZN-SFW11
ZN-J25A
ZN-J41A
Accessories
Appearance Application Power supply Model
250
× 250 mm
410
× 410 mm
Note: Be sure to use when connecting amplifier units.
Appearance Application Power supply Model
250 × 250 mm
610 × 610 mm
24 VDC
ZN-A2502D *
ZN-A4105D *
ZN-A6112
ZN-A6112P *
ZN9-AHP25
ZN9-AHP41
ZN9-AHP61
ZN9-APF25
ZN9-APF41
ZN9-APF61
1
1
1
2
1
1
For 250 × 250 mm
For 410 × 410 mm
For 610 × 610 mm
For 250 × 250 mm
For 410 × 410 mm
For 610 × 610 mm
Replacement
HEPA Filters
Replacement
Prefilters
Applicable Air
Clean Unit
Model Qty.
410 × 410 mm