User's Manual

V750 RFID READER/WRITER, ANTENNA 2006-06, REV.C
OPERATION MANUAL
83 of 110
©OMRON CORPORATION 2006
(4) Good BYE (GBYE) - Connection shut down
This command enables to shut down connection with Ethernet. This command is valid only when
Connection Method is Passive. (Error occurs if the mode is Active.) The communication of response that
indicates command receipt is
shut down (disconnected?) after sending.
Command GBYE<LF>

No argument
Response GBYE0000<LF>
Example 1) All setting of the reader shall be initialized to factory default setting.
[Tx] GBYE<LF>
[Rx] REST0000<LF>