User's Manual

V750 RFID READER/WRITER, ANTENNA 2006-06, REV.C
OPERATION MANUAL
8 of 110
©OMRON CORPORATION 2006
To avoid interferences with other systems, adhere to the following items and check them
before using the product:
-The product uses a publicly available ISM frequency band of 902-928MHz to
communicate with Tags. Some transceivers, motors, monitoring devices, power supplies,
and other similar RFID systems may generate noise, which cause radio interference and
may affect communication with Tags. If the product is required in the vicinity of these
items, check for any interferences prior to use.
In order to comply with FCC requirements for RF exposure safety, a separation distance
of at least 23cm(9.1in) needs to be maintained between the radiating elements of the
antenna and the bodies of nearby persons.
To avoid interferences with other systems, adhere to the following items and check them
before using the product:
-On the contrary, the system itself may affect radio station transmissions or medical
devices. Be cautions when using the system in the environments where such effects might
occur.
Keep cables away from those with high voltages or heavy current.
Properly shielded a grounded cables and connectors must be used for connection to host
computer and / or peripherals in order to meet FCC emission limits.