User's Manual

V750 RFID READER/WRITER, ANTENNA 2006-06, REV.C
OPERATION MANUAL
51 of 110
©OMRON CORPORATION 2006
3.1.2 Command Code List
Following is a list of the supported command codes. Each command is represented with four characters.
Command Code List
Command
Code
Command name Description
Executable in
communication?
(1) Communication Command (to communicate with tags)
RDID Read ID Reads ID data from the tag memory.
No
WTID Write ID Writes ID data into the tag memory.
No
RDDT Read Data
Reads data from the tag memory.
(including the password)
No
WTDT Write Data
Writes data to the tag memory.
(including the password)
No
LOCK Lock Sets Lock function in the tag.
No
KILL Kill Disables the tag permanently.
No
(2) Setting Command (to set a condition).
SETR Set Reader Sets the function condition in the R/W.
No
GETR Get Reader Reads the function conditions from the R/W.
No
SETO Set Reader Operation Sets the operation condition in the R/W.
No
GETO Get Reader Operation Reads the operation conditions from R/W. No
SETC Set Communication Sets the communication condition in the R/W.
(temporary setting).
No
GETC Get Communication Reads the communication condition from the R/W.
No
SAVE Save communication
settings
Save the communication condition into the
nonvolatile memories in the R/W. (permanent
setting)
No
(3) Control command (to control the action)
INIT Initialization Initializes all settings in the R/W.
No
STOP Stop Stops the communication with the tags.
Yes
EXIO
Ex
ternal Input Output
control
Reads input port status.
Sets condition of output port.
Yes
REST Reset Restarts the R/W.
Yes
GBYE Good Bye Disconnects the Ethernet connection.
No
RRES Request Resend Requests to resend the last response data.
Yes
TEST Test Tests the communication between host and the
R/W.
Yes