User's Manual

V750 RFID READER/WRITER, ANTENNA 2006-06, REV.C
OPERATION MANUAL
42 of 110
©OMRON CORPORATION 2006
2.3.2 Communication Sequence
As a way to communication to the tag(s), you can choose a sequence among the following four sequences
by specifying with the commands.
Name Code Description
1. Single access This method is used for communicating with a single tag in the read
field. It can reduce communication process time more than the time
under the Multi access mode. This is suitable for the place where the
reader reads a single tag at a time and the place which requires speed
and prompt control such as production process line.
Single Once “SOC” This is used for communicating with single tag in the read field. Just
after the communication transaction, the result is returned promptly.
Single Repeat “SRP” This is used for communicating with the single tag existing in the read
field repeatedly.
2.Multi access This method is used for communicating with one or more tag(s) in the
read field. It is suitable for the place where the reader reads various
numbers of tags existing in the read field such as logistics distribution
area.
Multi Once “MOC” This is used for communicating with multiple tags existing in the read
field. Just after the communication transaction, the result is returned
promptly.
Multi Repeat “MRP” This is used for communicating with multiple tags existing in the read
field repeatedly.