User's Manual

V750 RFID READER/WRITER, ANTENNA 2006-06, REV.C
OPERATION MANUAL
30 of 110
©OMRON CORPORATION 2006
1.3.8 Ethernet Interface
This port is used to connect the host to the R/W via Ethernet. To connect them, use the commercial cable
10/10Base-T.
■ Connector: RJ-45 (10Pin) LED: LINK(green)/ACT(yellow)
  LINK --- lights while linking normally.
  ACT --- lights when detects a carrier.
Pin No Name Description I/O
1
Reserved
- (
Do not use)
−
2
TXD (+)
Transmit Data + (positive) OUT
3
TXD (-)
Transmit Data - (negative) OUT
4
RXD (+)
Receive Data + (positive) IN
5
Reserved/Do not use
- (
Do not use)
−
6
Reserved/Do not use
- (Do not use)
−
7
RXD (-)
Receive Data - (negative) IN
8
Reserved/Do not use
- (
Do not use)
−
9
Reserved/Do not use
- (Do not use)
−
10
Reserved/Do not Use
- (Do not use)
−