User's Manual

V750 RFID READER/WRITER, ANTENNA 2006-06, REV.C
OPERATION MANUAL
22 of 110
©OMRON CORPORATION 2006
’’192.168.1.200’’
4. Plug the power adapter provided with the reader into the DC power input connector. Then connect the AC
power cord to a power outlet.
While the reader is powering up,
'PWR' LED will turn on. After the reader finishes its power-on self-test,
approximately 5 seconds,
'RUN' LED will turn on. The reader is now ready for operation.
Connector: Reverse TNC
Name Function
SG Signal output
GND Ground

* Prior to connect antenna(s) to the R/W, make sure the power is off. If antenna is connected during power-on, the R/W
can not detect the antenna.