user manual

13
2.Preparing the nebuliser for use
EN
6. Attach the cap, kids accessory, mask or mouthpiece
to the nebuliser kit.
1) Attach the cap to the inhalation air inlet.
2) Attach the kids accessory to the inhalation top.
3) Attach the mask or mouthpiece to the inhalation
top.
Note: If the amount of aerosol is too small, it is not
necessary to place the cap.
7. Attach the air tube.
1) Twist the air tube plug slightly and push it firmly into the air tube connector on
the compressor.
2) Twist the air tube plug slightly and push it firmly into the air tube connector on
the medication tank.
Notes:
• Make sure that the air tube is securely attached to the compressor and nebuliser kit, and
does not come loose. Twist the air tube plug slightly when inserting it into the air tube
connectors to avoid the air tube disconnecting during use.
• Take care not to spill the medication when attaching the air tube. Keep the nebuliser kit
upright.
NE-C801S-KDE_A_M_main.book Page 13 Friday, January 13, 2012 4:43 PM