User Manual
Table Of Contents
- TABLE OF CONTENTS
- 1. INTRODUCTION
- 2. INTENDED USE
- 3. SAVE THESE INSTRUCTIONS
- 4. IMPORTANT SAFETY PRECAUTIONS AND WARNINGS
- 5. HOW POCKET PAIN PRO WORKS
- 6. KNOW YOUR UNIT
- 7. ASSEMBLY STEPS
- 8. GET STARTED WITH YOUR THERAPY
- 9. HOW TO CONTROL AND REDUCE YOUR PAIN
- 10. CLEANING AND STORAGE
- 11. TROUBLESHOOTING
- 12. LIMITED WARRANTY
- 13. SPECIFICATIONS
- 14. FCC STATEMENT
- 15. GUIDANCE AND MANUFACTURER’S DECLARATION
29
Ifthishappens... Possiblecauses... Trythissolution...
PadLightisblinking. Are both pads attached to the
body?
Re-attach dislocated pad(s)
onto the skin rmly.
Have you removed the
transparent lm from the
pad?
Peel off lm on the adhesive
surface of pads.
Is the cord properly
connected to the main unit?
Connect cord plug correctly
into the jack at the bottom of
the main unit.
Is the adhesive surface of
pads dirty or dry?
Wash adhesive surface
of pads softly with your
ngertips for about 3
seconds under slow running
cold water.
If the above measures are not effective, contact us at 1-800-634-4350.
11. TROUBLESHOOTING