Thermostat User Manual

Table Of Contents

Initialize the Memory Tables?

Confirm

Cancel

Reference

[ SYSTEM MENU ]

Quit

Transmit Mode

Maintenance Mode

[ MAINTENANCE MENU ]

Quit

PT Setting Status

I/OCheck

Display History

Memory I ni t.

Memory Swi tches



Section 3-4

Select “Confirm”.

The memory table is initialized.

If “Cancel” is selected instead of “Confirm”, the NT600S returns to the “Memory

Initialization Menu” without initializing the memory.

If a memory table is initialized in the Maintenance Mode, it is initialized regard-

less of the setting for the resume function (resume function: page 98).

Initialization of the Display History Data Memory

Thedisplayhistory (page110)is storedin theorder ofoccurrence (timeorder)orthe

order of frequency (frequent order). Since no more display history data can be

stored if the memory becomes full, the memory has to be initialized at regular inter-

vals.

The display history data memory can be initialized by a command given from the

Host.

Using the System Menu, initialize the display history data memory by following the

procedure given below.

Select “Maintenance Mode”.

Select “Memory Init.”.