Operation Manual

2.Preparation

2. Preparation

2.1 Installing/Replacing the Batteries

1. Turn the main unit upside down.

2. Slide the battery cover in the

direction of the arrow while

pressing the ribbed part of the

cover.

3. Install or replace four “AAA” size

batteries so that the + (positive)

and - (negative) polarities match

the polarities indicated on the

battery compartment.

4. Put the battery cover back in

place.

Slide the battery cover as

indicated, until it clicks into

place.

Note: The measurement values continue to be stored in

memory even after the batteries are replaced.

HEM-7301-ITKE_main.book Page 10 Thursday, February 17, 2011 5:09 PM