user manual

11. Maintenance and Storage

• Clean the unit with a cloth lightly dampened with

water, disinfectant alcohol or detergent, then wipe

it dry with a dry cloth. Do not wipe the SD memory

card slot cover.

• Wipe the electrodes using a cloth dampened with

disinfectant alcohol.

• Do not wipe the unit with benzene, gasoline, paint

thinner, concentrated alcohol, or other volatile

detergents.

• Do not place objects on top of the unit. This could

damage the unit.

• Do not disassemble the unit. There are no user

serviceable parts. Repairs should only be carried

out by authorized personnel.

• Do not sterilise this unit in an autoclave, ultraviolet

steriliser or gas steriliser (EOG, formaldehyde,

high density ozone etc.)

• This device does not require calibration during the

expected life cycle of five years.

HCG-801-E.book Page 51 Tuesday, December 13, 2011 5:35 PM