Manual

2.Preparation

2. Preparation

2.1 Installing/Replacing the Batteries

1. Remove the battery cover.

2. Insert four “AA” batteries as

indicated in the battery compartment

and then replace the battery cover.

Notes:

• If the battery low symbol ( ) appears on the display, replace

all four batteries at the same time.

- When the battery low symbol ( ) starts to blink, you will still

be able to use the unit for a short while. You should replace

the batteries with new ones ahead of time. Long-life alkaline

batteries are recommended.

- When the symbol ( ) remains lit, the batteries are

exhausted. You should replace the batteries with new ones

at once. Turn the unit off before replacing the batteries.

• Remove the batteries if the monitor will not be used for three

months or more.

• If the batteries are removed for 30 seconds or more, the Date/

Time setting will need to be reset. See “Setting the Date and

Time” for details.

• Disposal of used batteries should be carried out in accordance

with the national regulations for the disposal of batteries.

HEM-7000 main.book Page 7 Monday, June 19, 2006 8:53 AM