Operation Manual

EN
17
If the symbol blinks or appears on the display,
replace the battery with a new (CR2032) battery.
Note: The supplied battery is for trial use. This battery
can run out within 6 months.
 Replacing the battery
1 Turn the button on the back
of the unit to left, unlock
and remove the battery
cover by pulling it off in the
direction of the arrow.
2 Remove the battery with a
thin, sturdy, stick that will not break
easily.
Note: Do not use a pair of metal
tweezers or a screwdriver.
3 Insert the battery
(CR2032) with the
positive (+) side face
up.
4 Replace the
battery cover by
sliding the catch in
first, then turn the
button to right and
lock the battery
cover.
BATTERY LIFE AND REPLACEMENT
NOT FOR PRINTING