Operation Manual

EN
15
The measurements for each day (steps, distance walked,
calories burned and aerobic steps) are automatically stored
in memory and reset to 0 at midnight (0:00) each day.
 Recall data
1 Press to select the type of display you want to see.
2 Press to view the measurement results history.
The display changes with each press of as shown
below.
• Keep pressed to automatically change the display
until the current display is displayed.
• Press to return to the current display.
Notes:
• You cannot use the memory function when using the
Action mode (refer to “Action mode” on page 12).
• If no buttons are pressed for more than 1 minute, the
display returns to the current display.
MEMORY FUNCTION
Current display
Action mode
memory
Memory for 1 to 7
days
NOT FOR PRINTING