Operation Manual

12
EN
 Action mode
The Action mode stores the measurement values
seperately for a specified walking period or session.
Note: You cannot check the current display or memory
function when using the Action mode.
1 Press for two seconds.
rotates when using the Action mode.
2 Start walking.
The display changes with each press of to display
the step count, distance, calories burned, and aerobic
(brisk) steps, in that order.
3 Press for two seconds from any of the display to
finish the Action mode.
Press to view the measurement results after the
Action mode has finished (refer to “MEMORY
FUNCTION” on page 15).
Notes:
• Only one session can be stored in memory for the
Action mode.
• If you don’t stop the Action mode within 24 hours, the
unit will go back to the normal mode.
NOT FOR PRINTING