Datasheet

To the customer who buys Omron products
Warranty and Limited Warranty
(As of September, 2015. Please check Omron Corporation’s homepage for the latest version of Terms and Conditions.)
Thank you for using Omron Corporation (“Omron”) products. The Terms and Conditions hereunder are applied to Omron products regardless of
where they are purchased. When you place an order, you are expected to agree to the Terms and Conditions described below.
1. Definition
The definition of terms used in these Terms and Conditions are as follows:
(1) Omron products: FA system equipment, general-purpose control devices, sensors, and electronic/mechanism components under Omron brand
(2) Catalogues: Omron general catalogue, FA system equipme
nt general catalogue, safety component general catalogue, electronic/mechanism
components general catalogue and other catalogues, specifications, instructions and manuals of Omron products, including electronically provided
information available on the Omron electronic components information website, etc.
(3) Usage conditions: Usage conditions, rating, performance, operating environment, handling instructions, cautions, prohibited use, etc. of Omron
products described in catalogues.
(4) Customer application: Application of Omron products by customers which include embedding and/or using Omron products in their
parts/components, electronic substrates, devices, equipment or systems manufactured by customers.
(5) Fitness: (a) fitness,
(b) performance, (c) non-infringement of third-party intellectual property, (d) compliance with laws and regulations and (e)
conformity to standards.
2. Caution on Descriptions
Attention is required to the following points on descriptions in catalogues.
(1) Rated values and performance values are the product of tests performed for separate single conditions, including but not limited to temperature and
humidity. It is not intended to warrant rated values and performance values for multiple combined conditions.
(2) Reference data are provided for reference only. Omron does NOT warrant that Omron products work properly at all time in the range of reference
data.
(3) Application examples
are provided for reference only. Omron does NOT warrant the fitness of Omron products under such application.
(4) Omron may discontinue the production of Omron products or change the specifications of them for the purpose of improving such products or other
reasons entirely at its own discretion.
3. Precautions
Please be aware of and accept the following when you introduce or use Omron products:
(1) Please use Omron products in compliance with usage conditions including rating and performance.
(2) Please confirm fitness of Omron products in your application and use your own judgment to determine the appropriateness of using them in such
application. Omron shall not warrant the fitness of Omron products in customer application.
(3) Please confirm that Omron
products are properly wired and installed for their intended use in your overall system.
(4) When using Omron products, please make sure to (i) maintain a margin of safety vis-à-vis the published rated and performance values, (ii) design to
minimize risks to customer application in case of failure of Omron products, such as introducing redundancy, (iii) introduce system-wide safety
measures to notify risks to users, and (iv) conduct regular maintenance on Omron products and customer application.
(5) Omron products are designed and manufactured as general-purpose products for use in general industrial products. They are not intended to be used
in the following applications.
If you are using Omron products in the following applications, Omron shall not provide any warranty for such
Omronproducts. Even in the case of the following applications to elevator/lift equipment and medical devices, etc, some case are likely applied to
an usual guarantee prescribed on next article as general-purpose products used for general industrial products. So, please contact our sales person in
charge.
(a) Applications with stringent safety requirements, including but not limited to nuclear power control equipment, combustion equipment,
aerospace equipment, railway equipment, elevator/lift equipment, amusement park equipment, medical equipment, safety devices and other
applications that could cause dang
er/harm to people’s body and life.
(b) Applications that require high reliability, including but not limited to supply systems for gas, water and electricity, etc., 24 hour continuous
operating systems, financial settlement systems and other applications that handle rights and property.
(c) Applications under severe conditions or in severe environment, including but not limited to outdoor equipment, equipment exposed to chemical
contamination, equipment exposed to electromagnetic interference and equipment exposed to vibration and shocks.
(d) Applications under conditions and environment not described in catalogues.
(6) In addition to the applications listed from (a) to (d) above, Omron products are not intended for use in automotive applications (including two wheel
vehicles). Pleas
e do NOT use Omron products for automotive applications. Please contact Omron sales staff for products for automotive use.
4. Warranty Terms and Conditions
The terms and conditions for warranty of Omron products are as follows:
(1) Warranty period: One year after the purchase from Omron or Omron's agency.
(2) Coverage: Omron will provide either of the following two services for the malfunctioning Omron products at its own discretion:
(a) Free repair of malfunctioning Omron products at an Omron maintenance service location (Repair service is not available for
electronic/mechanism parts.), or
(b) Free replacement of the malfunctioning Omron products with the same number of replacement/alternative products.
(3) Exceptions: Omron will not cover Omron products under its warranty
if the cause of the malfunction falls under any of the following:
(a) Usage in a manner other than the original intended use for the Omron products.
(b) Usage outside of the usage conditions.
(c) Modification or repair made to the Omron products by other than Omron personnel.
(d) Software program embedded by other than Omron or usage of such software.
(e) Causes which could not have been foreseen with the level of science and technology at the time of shipping from Omron.
(f) Causes originating from other than Omron or Omron products (including force majeure such as but not limited to natural disasters).
5. Limitation of Liability
The warranty set out in these Terms and Conditions is the
whole and sole liability for Omron products. There are no other warranties, expressed or
implied. Omron and the distributors of Omron products are not liable for any damages which may arise from or be related to Omron products.
6. Export Controls
Customers of Omron products shall comply with all applicable laws and regulations of Japan and/or other relevant countries with regard to security
export control, when exporting Omron products and/or technical documents or providing such products and/or documents to a non-resident.
Omronmay not provide customers with Omron products and/or technical documents should they fail to comply with such laws and regulations.
(E
C300E)