Datasheet
DIP
SOP
SSOP
USOP
VSON
S-VSON
Introduction
General-purpose
Certified Models with
Standards Certification
G3VM-61UR
@
/81UR
@
/101UR
High-dielectric-
strength
High-load-voltage Multi-contact-pair
(2a, 2b, and 1a1b)
High-current and
Low-ON-resistance
Small and High-
dielectric-strength
Current-limiting
Low-output-capacitance
and Low-ON-resistance
Small and High-
load-voltage
214
G3VM-61UR@/81UR@/101UR MOS FET Relays
■Absolute Maximum Ratings (Ta = 25°C)
* The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the
light-receiving side.
■Electrical Characteristics (Ta = 25°C)
* Turn-ON and Turn-OFF Times
■Recommended Operating Conditions
For usage with high reliability, Recommended Operation Conditions is a measure that takes into account the derating of Absolute
Maximum Ratings and Electrical Characteristics.
Each item on this list is an independent condition, so it is not simultaneously satisfy several conditions.
Item Symbol G3VM-61UR1 G3VM-61UR G3VM-81UR G3VM-81UR1G3VM-101UR Unit Measurement conditions
Input
LED forward current IF 30 mA
LED forward current reduction rate ΔIF/°C −0.3 mA/°C Ta≥25°C
LED reverse voltage VR 5 V
Connection temperature TJ 125 °C
Output
Load voltage (AC peak/DC) VOFF 60 80 100 V
Continuous load current (AC peak/DC) IO 120 400 120 200 100 mA
ON current reduction rate ΔIO/°C −1.2 −4.0 −1.2 −2 −1mA/°C Ta≥25°C
Pulse ON current lop 360 1200 360 600 300 mA t=100 ms, Duty=1/10
Connection temperature TJ 125 °C
Dielectric strength between I/O * VI-O 300 Vrms AC for 1 min
Ambient operating temperature Ta −40 to +85 °C
With no icing or condensation
Ambient storage temperature Tstg −40 to +125 °C
Soldering temperature − 260 °C 10 s
Item Symbol G3VM-61UR1 G3VM-61UR G3VM-81UR G3VM-81UR1 G3VM-101UR Unit Measurement conditions
Input
LED forward voltage VF
Minimum 1.1
V I
F=10 mATypical 1.27
Maximum 1.4
Reverse current IR Maximum 10 μAVR=5 V
Capacitance between terminals
CT Typical 30 pF V=0, f=1 MHz
Trigger LED forward current IFT
Typical 1 − 1 −
mA I
O=100 mA
Maximum 3
Release LED forward current IFC Minimum 0.1 mA IOFF=10 μA
Output
Maximum resistance with
output ON
R
ON
Typical 10 1.0 7 6 8
Ω
IF=5 mA, t<1 s,
I
O=Continuous load current
ratings
Maximum 15 1.5 12 8 14
Current leakage when the
relay is open
I
LEAK Maximum 1 0.02 1 0.2 nA VOFF=Load voltage ratings
Capacitance between
terminals
C
OFF
Typical 0.7 20 5 6.5 6
pF V=0, f=100 MHz, t<1 s
Maximum 1.3 − 7118
Capacitance between I/O terminals
CI-O Typical 1 pF f=1 MHz, VS=0 V
Insulation resistance between I/O
terminals
R
I-O Typical 10
8
MΩ VI-O=500 VDC, ROH≤60%
Turn-ON time tON
Typical 0.05 −
ms
I
F=5 mA, RL=200 Ω,
V
DD=20 V *
Maximum 0.2 0.5 0.4 0.3
Turn-OFF time tOFF
Typical 0.015 −
Maximum 0.2 0.5 0.2 0.4 0.3
Item Symbol G3VM-61UR1 G3VM-61UR G3VM-81UR G3VM-81UR1 G3VM-101UR Unit
Load voltage (AC peak/DC) VDD Maximum 48 64 80 V
Operating LED forward current IF
Minimum 5
mA
Typical 7.5
Maximum 20
Continuous load current (AC peak/DC) IO Maximum 120 400 120 200 100
Ambient operating temperature Ta
Minimum −20
°C
Maximum 65
V
OUT
I
F
tON tOFF
10%
90%
IF
1
2
4
3
RL
VDD
VOUT