Datasheet

204
DIP
SOP
SSOP
USOP
VSON
S-VSON
Introduction
General-purpose
Certified Models with
Standards Certification
G3VM-61LR/81LR/101LR
High-dielectric-
strength
High-load-voltage Multi-contact-pair
(2a, 2b, and 1a1b)
High-current and
Low-ON-resistance
Small and High-
dielectric-strength
Current-limiting
Low-output-capacitance
and Low-ON-resistance
Small and High-
load-voltage
G3VM-61LR/81LR/101LR
MOS FET Relays SSOP, Small and High-load-voltage Type
MOS FET Relays
in SSOP packages
for high load voltages
• Load voltage: 60 V, 80 V, or 100 V
■Application Examples
■Ordering Information
* The AC peak and DC value are given for the load voltage and continuous load current.
Note: To order tape packaging for Relays with surface-mounting terminals, add "(TR05)" to the end of the model number.
Tape-cut SSOPs are packaged without humidity resistance. Use manual soldering to mount them. Refer to common precautions.
■Absolute Maximum Ratings (Ta = 25°C)
* The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the
light-receiving side.
RoHS Compliant
■Package (Unit : mm, Average) ■Model Number Legend
Package
Contact
form
Terminals
Load voltage
(peak value) *
Continuous load
current
(peak value) *
Tape cut packaging Tape packaging
Model
Minimum
package quantity
Model
Minimum
package quantity
SSOP4
1a
(SPST-NO)
Surface-mounting
Terminals
60 V 400 mA G3VM-61LR
1 pc.
G3VM-61LR(TR05)
500 pcs.80 V 120 mA G3VM-81LR G3VM-81LR(TR05)
100 V 80 mA G3VM-101LR G3VM-101LR(TR05)
Item Symbol G3VM-61LR G3VM-81LR G3VM-101LR Unit Measurement conditions
Input
LED forward current IF 50 mA
LED forward current reduction rate ΔIF/°C -0.5 mA/°C Ta ≥ 25°C
LED reverse voltage VR 5V
Connection temperature TJ 125 °C
Output
Load voltage (AC peak/DC) VOFF 60 80 100 V
Continuous load current (AC peak/DC) IO 400 120 80 mA
ON current reduction rate ΔIO/°C -4 -1.2 -0.8 mA/°C Ta ≥ 25°C
Pulse ON current lop 1200 360 240 mA t=100 ms, Duty=1/10
Connection temperature TJ 125 °C
Dielectric strength between I/O * VI-O 1500 Vrms AC for 1 min
Ambient operating temperature Ta -20 to +85 °C
With no icing or condensation
Ambient storage temperature Tstg -40 to +125 °C
Soldering temperature − 260 °C 10 s
Note: The actual product is marked differently
from the image shown here.
• Semiconductor test equipment
• Test & Measurement equipment
• Communication equipment
• Data loggers
Note: The actual product is marked differently
from the image shown here.
SSOP 4-pin
3.8
2.04
1.8
G3 VM-@ @ @ @ @
123 45
1. Load Voltage
6 : 60 V
8 : 80 V
10 : 100 V
2. Contact form
1 : 1a (SPST-NO)
3. Package
L : SSOP 4-pin
4. Additional functions
R: Low ON resistance
5. Other informations
When specifications overlap, serial
code is added in the recorded order.