Datasheet

144
G3VM-31QR/61QR2/101QR1 MOS FET Relays
DIP
SOP
SSOP
USOP
VSON
S-VSON
Introduction General-purpose Small and High-
dielectric-strength
High-dielectric-
strength
Current-limiting
Low-output-capacitance
and Low-ON-resistance
Small and High-
load-voltage
Certified Models with
Standards Certification
G3VM-31QR/61QR2/101QR1
High-load-voltage Multi-contact-pair
(2a, 2b, and 1a1b)
High-current and
Low-ON-resistance
■Absolute Maximum Ratings (Ta = 25°C)
* The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side
and all pins as a group on the light-receiving side.
■Electrical Characteristics (Ta = 25°C)
* Turn-ON and Turn-OFF Times
■Recommended Operating Conditions
For usage with high reliability, Recommended Operation Conditions is a measure that takes into account the derating of Absolute
Maximum Ratings and Electrical Characteristics.
Each item on this list is an independent condition, so it is not simultaneously satisfy several conditions.
Item Symbol G3VM-31QR G3VM-61QR2 G3VM-101QR1 Unit Measurement conditions
Input
LED forward current IF 30 mA
LED forward current reduction rate ΔIF/°C −0.3 mA/°C Ta≥25°C
LED reverse voltage VR 5 V
Connection temperature TJ 125 °C
Output
Load voltage (AC peak/DC) VOFF 30 60 100 V
Continuous load current (AC peak/DC) IO 1500 1000 650 mA
ON current reduction rate ΔIO/°C −15 −10 −6.5 mA/°C Ta≥25°C
Pulse ON current lop 4.5 3 2 A t=100 ms, Duty=1/10
Connection temperature TJ 125 °C
Dielectric strength between I/O * VI-O 500 Vrms AC for 1 min
Ambient operating temperature Ta −40 to +110 °C
With no icing or condensation
Ambient storage temperature Tstg −40 to +125 °C
Soldering temperature − 260 °C 10 s
Item Symbol G3VM-31QR G3VM-61QR2 G3VM-101QR1 Unit Measurement conditions
Input
LED forward voltage VF
Minimum 1.1
VI
F=10 mATypical 1.21
Maximum 1.4
Reverse current IR Maximum 10 μAVR=5 V
Capacity between terminals CT Typical 30 pF V=0, f=1 MHz
Trigger LED forward current IFT
Typical 0.6 0.7
mA I
O=100 mA
Maximum 3
Release LED forward current IFC Minimum 0.1 mA IOFF=10 µA
Output
Maximum resistance with
output ON
R
ON
Typical 0.1 0.2 0.4
Ω
G3VM-31QR/61QR2,
I
O=1000 mA, IF=5 mA, t<1 s
G3VM-101QR1,
I
O=650 mA, IF=5 mA, t<1 s
Maximum 0.2 0.3 0.6
Current leakage when the relay
is open
I
LEAK Maximum 1
1000
(1)
nA
G3VM-31QR :V
OFF= 20 V
G3VM-61QR2 :V
OFF= 60 V
(V
OFF=50 V)
G3VM-101QR1 :V
OFF= 100 V
(V
OFF=80 V)
Capacity between terminals Coff
Typical 120 80 50
pF V=0, f=100 MHz, t<1 s
Maximum − 150 −
Capacity between I/O terminals CI-O Typical 1 0.9 pF f=1 MHz, VS=0 V
Insulation resistance between I/O
terminals
R
I-O Typical 10
8
MΩ VI-O=500 VDC, ROH≤60%
Turn-ON time tON
Typical 0.8 0.75 0.6
ms
I
F=5 mA, RL=200 Ω,
V
DD=20 V *
Maximum 2
Turn-OFF time tOFF
Typical 0.05 0.04
ms
Maximum 1 0.3
Item Symbol G3VM-31QR G3VM-61QR2 G3VM-101QR1 Unit
Load voltage (AC peak/DC) VDD Maximum 24 48 80 V
Operating LED forward current IF
Minimum 5
mA
Typical 7.5
Maximum 20
Continuous load current (AC peak/DC) IO Maximum 1300 1000 650
Ambient operating temperature Ta
Minimum −20
°C
Maximum 100
I F
1
2
4
3
R L
V DD
V OUT
V OUT
I F
t ON t OFF
10%
90%