Datasheet

ManualsBrandsOMRON ManualsRelaysPlug-in relay 12 Vdc 10 A 1 change-over 1 pc(s)

G2R

Specifications

Coil Ratings

Rated voltage

12 VAC 24 VAC 100/

(110) VAC

120 VAC 200/

(220) VAC

220 VAC 230 VAC 240 VAC

Rated current* 50 Hz

93 mA 46.5 mA 11 mA 9.3 mA 5.5

(4.0) mA

5.1 mA 4.7 (3.7)

4.7 mA

60 Hz

75 mA 37.5 mA 9/

(10.6) mA

7.5 mA 4.5

(5.3) mA

4.1 mA 3.8 (3.1)

3.8 mA

Coil resistance*

260

4,600

6,500

20,200

(25,000)

25,000

26,850

(30,000)

30,000

Coil inductance Armature OFF

0.19 0.81 13.34 21 51.3 57.5 62 65.5

(H) (ref. value) Armature ON

0.39 1.55 26.84 42 102 117 124 131

Must operate voltage

80% max. of rated voltage

Must release voltage

30% max. of rated voltage

Max. voltage

110% of rated voltage

Power consum ption

Approx. 0.9 VA at 60 Hz (approx. 0.7 VA at 60 Hz)

Note:

1. Rated voltage of bifurcated crossbar contact type: 100/(110) VAC, 200/(220) VAC, 230 VAC (Approx. 0.7 VA at 60 Hz)

2. Depending on the type of Relay, Some Relays do not have coil specifications. Contact your OMRON representative for more de-

tails.

Rated voltage

5VDC 6VDC 12 VDC 24 VDC 48 VDC 100 VDC

Rated current* (50/60 Hz)

106 mA 88.2 mA 43.6 mA 21.8 mA 11.5 mA 5.3 mA

Coil resistance*

275

1,100

4,170

18,860

Coil inductance Armature OFF

0.20 0.28 1.15 4.27 13.86 67.2

(H) (ref. value) Armature ON

0.39 0.55 2.29 8.55 27.71 93.2

Must operate voltage

70% min. of rated voltage

Must release voltage

15% min. of rated voltage

Max. voltage

110% of rated voltage

Power consum ption

Approx. 0.53 W

Note:

Rated voltage of bifurcated crossbar contact type: 12 VDC, 24 VDC

High-sensitivity Relays

Rated voltage

5VDC 6VDC 12 VDC 24 VDC 48 VDC

Rated current (50/60 Hz)

71.4 mA 60 mA 30 mA 15 mA 7.5 mA

Coil resistance

100

400

1,600

6,400

Coil inductance Armature OFF

0.37 0.53 2.14 7.80 31.20

(H) (ref. value) Armature ON

0.75 1.07 4.27 15.60 62.40

Must operate voltage

70% max. of rated voltage

Must release voltage

15% max. of rated voltage

Max. voltage

110% of rated voltage

Power consum ption

Approx. 0.36 W

*Note:

1. The rated current and coil resistance are measured at a coil temperature of 23

C with atolerance of

+15%

-20%

(AC rated current) or

10% (DC coil resistance).

2. LEDs are used for the built-in operation indicator . For models equipped with these indications, the VAC rated current must be in-

creased by approximately 1 mA; the VDC rated current, by approximately 4 mA.

3. Operating characteristics are measured at a coil temperature of 23