Server User Manual

Klinkmann Automation Omron Ethernet DAServer 21
Omron Ethernet DAServer Ver 1.x User Manual Rev 1.4 17014m14
• To activate the DAServer, right-click on ArchestrA.DASOmronEth.1 and select
Activate Server from the shortcut menu.
Note: To run the Omron Ethernet DAServer as a service, right-click on the DAServer
name and select Configure As Service from the shortcut menu. You can configure it as
an auto service or manual service. For more information about configuring your DAServer
as a service, see the Activation/Deactivation/Service Component of the DAServer
Manager documentation.
DASOmronEth Hierarchy in the DAServer Manager
Note: Before attempting to configure your DAServer, you should determine the
hierarchical structure of your network/PLC environment.
The server-specific configuration portion of the DASOmronEth hierarchy tree under the
DAServer Manager starts at the SOCKET object.
1. Configure the SOCKET object from the Configuration branch of the hierarchy after
the DAServer has been installed.
2. Rename this object as appropriate.
Important! If you subsequently clear your configuration hierarchy, you must create this
SOCKET object from the Configuration branch of the hierarchy. From this point, all of
the following instructions apply.
To create SOCKET objects from the Configuration branch
1. Right-click on Configuration.
2. Select Add SOCKET Object from the shortcut menu.
• A new SOCKET object is created as a node in the hierarchy tree, and it is named
New_SOCKET_000 by default.
3. Rename the newly created object as appropriate, for example, “Socket1”.
The Socket1 configuration view (right pane) is displayed.